Static IPv4

Use the following procedure to configure a static IPv4 address.
  1. In IPv4 Connection Type, select Static IP.
  2. When the Internet Connection Settings options appear, you can make changes to the following settings:
    • IPv4 Address: Enter the static IP address that you want to assign to the AP in IPv4 (dot-decimal) format.
    • IPv4 Subnet Mask: Enter the subnet mask for the network.
    • IPv4 Gateway: Enter the gateway IP address of the Internet interface.
  3. To allow the DNS mode to be determined automatically, set IPV4 DNS Mode to Auto.
  4. To set the DNS mode manually, set IPV4 DNS Mode to Manual. Then enter the following:
    • IPv4 Primary DNS Server: The IP address of the primary Domain Name System (DNS) server.
    • IPv4 Secondary DNS Server: The IP address of the secondary DNS server.
  5. Continue with Static IPv6, or
  6. Click Update Settings to save your changes.