Using an External Server for User Authentication
Once your wireless network is set up, you can instruct ZoneDirector to authenticate
wireless users using your existing Authentication, Authorization and Accounting (AAA)
server. The following types of AAA servers are supported:
The ZoneDirector web interface provides a sample template for each of the AAA server types. These templates can be customized to match your specific network setup, or you can create new AAA server objects and add them to the list.
To use an external authentication server:
- Go to > . The Authentication/Accounting Servers page appears.
- Click the Create New link in the Authentication/Accounting Servers table, or click Edit next to the relevant server type in the list.
- When the
Create New form (or “Editing” form) appears, make the following entries:
- In Name, type a descriptive name for this authentication server (for example, “Active Directory”).
- In Type, verify that one of the following options is selected:
- Active Directory: If you select this option, you also need to enter the IP address of the AD server, its port number (default is 389), and its Windows Domain Name.
- LDAP: If you select this option, you also need to enter the IP address of the LDAP server, its port number (default is 389), and its LDAP Base DN.
- RADIUS: If you select this option, you also need to enter the IP address of the RADIUS server, its port number (default is 1812), and its shared secret.
- RADIUS Accounting: If you select this option, you also need to enter the IP address of the RADIUS Accounting server, its port number (default is 1813), and its shared secret.
- Additional options appear depending on which AAA server Type you have selected. See the respective server type for more information.
- Click OK to save this server entry. The page refreshes and the AAA server that you added appears in the list of authentication and accounting servers.
Note: If you want to test your connection to the authentication server, enter an existing
user name and password in the Test Authentication Settings panel, and then click Test.
If testing against a RADIUS server, this feature uses PAP or CHAP depending on the
RADIUS server configuration and the choice you made in RADIUS/RADIUS Accounting. Make
sure that either PAP or CHAP is enabled on the Remote Access Policy (assuming Microsoft
IAS as the RADIUS server) before continuing with testing authentication settings.