Connecting the APs to the Network
- Place the new APs in the appropriate locations.
- Write down the MAC address (on the bottom of each device) and note the specific location of each AP as you distribute them.
- Connect the APs to the LAN with Ethernet cables.
Note: If using PoE, ensure that you use Cat5e or better Ethernet cables.Note: By default, Ruckus APs will attempt to obtain an IP address via DHCP as soon as they are connected to the network. If you do not want the AP to automatically request an IP address, you must first configure a static IP address using the AP web interface or CLI before connecting them to your network.
- Connect each AP to a power source.
Note: Alternatively, if the APs that you are using are PoE-capable, they will draw power through the Ethernet cable if connected to a PoE switch.