Create an Operator Profile

To create an Operator Profile:
  1. Go to Services & Profiles > Hotspot 2.0 Services.
  2. Click Create New under. Alternatively, you can create a Hotspot 2.0 Operator Profile from the WLAN creation page while creating a new WLAN or modifying an existing WLAN (Wireless LANs > Edit > Type > Hotspot 2.0 > Hotspot 2.0 Operator > Create New.)
  3. Configure the settings in Table Hotspot 2.0 Operator profile configuration options to create a Hotspot 2.0 Operator profile.
    Option Description
    Name Enter a name for this Operator profile. This name identifies the service operator when assigning an HS2.0 service to a HS2.0 WLAN.
    Description (Optional) Enter a description for the service.
    Venue Information Select venue group and venue type as defined in IEEE802.11u, Table 7.25m/n.
    ASRA Option Additional steps required for access. Select to indicate that the network requires a further step for access.
    Internet Option Specify if this HS2.0 network provides connectivity to the Internet.
    Access Network Type Access network type (private, free public, chargeable public, etc.), as defined in IEEE802.11u, Table 7-43b.
    IP Address Type Select IP address type availability information, as defined in IEEE802.11u, 7.3.4.8.
    Operator Friendly Name Network operator names in multiple languages.
    Service Provider Profiles Information for each service provider, including NAI realm, domain name, roaming consortium, 3GPP cellular network info. (A Service Provider profile must first be created before it appears here.) Up to six Service Provider Profiles can be indicated for each Operator Profile.
    HESSID Homogenous extended service set identifier. The HESSID is a 6-octet MAC address that identifies the homogeneous ESS. The HESSID value must be identical to one of the BSSIDs in the homogeneous ESS.
    WAN Metrics Provides information about the WAN link connecting an IEEE 802.11 access network and the Internet; includes link status and backhaul uplink/downlink speed estimates.
    Connection Capability Provides information on the connection status within the hotspot of the most commonly used communications protocols and ports. 11 static rules are available, as defined in WFA Hotspot 2.0 Technical Specification, section 4.5.
    Additional Connection Capability Allows addition of custom connection capability rules. Up to 21 custom rules can be created.
  4. Click OK to save this Operator Profile.
  5. Continue to Create a Hotspot 2.0 WLAN.