Restoring Archived Settings to ZoneDirector

Restoring a backup file will automatically reboot ZoneDirector and all APs that are currently associated with it. Users associated with these APs will be temporarily disconnected; wireless access will be restored automatically after ZoneDirector and the APs have completed booting up.

To restore ZoneDirector configuration settings from a backup file:

  1. Go to Administer > Backup.
  2. Under Restore Configuration, click Choose File.
  3. Locate a previously saved backup file, select the file, and then click Open.
  4. Three restore options appear:
    • Restore everything: Select this option if you want the device to use all the settings configured in the backup file (including the IP address, wireless settings, access control lists, AP and WLAN group configurations, etc.).
      Note: If you use the Restore everything option to restore settings from one ZoneDirector unit to another, note that wireless clients reporting to the AP managed by the first ZoneDirector unit will need to go through Zero-IT activation again to obtain new client certificates. Zero-IT activation is enabled by default, therefore no manual configuration is required from you.
    • Restore everything, except system name and IP address settings (for failover deployment at the same site): Select this option to import settings saved from a primary to a backup ZoneDirector for Smart Redundancy deployment.
      Note: In addition to system name and IP address, this option restores everything except for the following configuration settings:
      1. VLAN settings.
      2. Management IP address and VLAN settings.
      3. Smart Redundancy settings.
      4. DHCP server settings.
      5. Session timeout.
      6. Limited ZD Discovery and Management VLAN settings in Access Point Policies.
    • Restore only WLAN settings, access control list, roles, and users (use this as a template for different sites): Select this option if you want to use the backup file as a configuration template.
  5. Click the Restore button.
ZoneDirector restores the backup file. During this process, ZoneDirector automatically logs you out of the web interface. When the restore process is complete, ZoneDirector automatically restarts and your wireless network will be ready for use again.