Configuring an Application Policy

Application Policies can be configured to control access to applications or to control traffic generated by applications.
To create an Application Denial Policy:
  1. Go to Services & Policies > Access Control.
  2. In Application Policy, click Create.
    Note: Alternatively, you can create an Application Denial Policy from the WLAN creation page while creating a new WLAN or modifying an existing WLAN (Wireless LANs > Edit > Advanced Options > Application Visibility > Enable > Apply Policy Group > Create New.)
  3. Enter a Name and optionally a Description for the policy
  4. In Rules, click Create New to create a new rule for this policy.
  5. In Rule Type, select one of the following policy rule types:
    • Denial Rules: Block the application completely.
    • QoS: Apply QoS prioritization rules to the application.
    • Rate Limiting: Limit traffic volume consumed by the application.
  6. In Application Type, select one of the following application categorization methods:
    • System Defined: Choose from a number of built-in categories.
    • IP Based User Defined Application: Choose from user-defined applications.
    • Port Based User Defined Application: Choose from user-defined applications.
  7. In Application, select either one of the system-defined or user-defined applications from the list.
  8. Click OK to save the rule, and click OK to save the policy.
    Note: When using port-based rules: There is no distinction between the TCP and UDP protocols, so care should be taken if wishing to block a specific application port as that will apply to both IP protocols and may inadvertently block another application using the other protocol.