Setting the System Time

Many ZoneDirector features require that the controller maintains the proper system time. Maintaining the proper time relies on periodically retrieving the time from a Network Time Protocol (NTP) server on the internet.

During the initial setup, the internal clock is automatically synchronized with the clock on your administration PC. You can use the web interface to check the current time on the internal clock, which shows up as a static notation in the Configure tab workspace. If this notation is incorrect, you can re-synchronize the internal clock to your PC clock immediately by clicking the Sync Time with Your PC button.

A preferable option is to link your ZoneDirector to an NTP server (as detailed below), which provides continual updating with the latest time.

  1. Go to System > System Settings, and locate the System Time section.
  2. Click Refresh to update the ZoneDirector display (a static snapshot) from the internal clock.
  3. In Sync Time with your PC, if needed, click this to update the internal clock with the current time settings from your administration PC.
  4. In Use NTP server to synchronize the ZoneDirector clock automatically (enabled by default), clear this check box to disable this option, or enter the DNS name or IP address of your preferred NTP server to use a different one.
  5. Select System defined or User defined time zone. By default, the system defined time zones are listed in the adjacent drop-down menu. For information on the user-defined time zone option, see Configuring a User-Defined Time Zone.
  6. Select time zone for your location: Choose your time zone from the drop-down menu.
  7. Automatically adjust clock for daylight saving changes: Enable to adjust for DST where applicable.
  8. Click Apply to save any changes.