Changing the Network Addressing
IIf you need to update the IP address and DNS server settings of ZoneDirector, follow
the steps outlined below.
- Go to System > System Settings.
- Review the
Device IP Settings options.
- Select one of the following:
- Enable IPv6 Support: By default, ZoneDirector operates in IPv4 mode. If your network uses IPv6, select Enable IPv6 Support and enter configuration settings for either IPv6 only or dual IPv4/IPv6 support. See IPv6 Configuration for more information.
- Manual: If you select Manual, enter the correct information in the now-active fields (IP Address, Netmask, and Gateway are required).
- DHCP: If you select DHCP, no further information is required.
- Click Apply to save your settings. You will lose connection to ZoneDirector.
- To log back into the web interface, use the newly assigned IP address in your web browser or use the UPnP application to rediscover ZoneDirector.