Importing a USB Software Package
The ZoneDirector web interface allows administrators to provision SmartPoint APs with the USB device configuration files directly through ZoneDirector, providing a simple and straightforward provisioning process with minimal human intervention required.
Provisioning requires that the SmartPoint Access Points must be connected to the ZoneDirector acting as the provisioning server over the wired network. After an AP is provisioned, an automatic 3G/4G/LTE/WiMAX network connection is made to connect the AP to the Internet, then to ZoneDirector, enabling the creation of an LWAPP tunnel and providing 802.11 wireless services.
To upload a USB provisioning file to ZoneDirector:
To provision a SmartPoint Access Point with USB software:
- Plug the 3G/4G/LTE/WiMAX USB modem into the SmartPoint AP’s USB port.
- Connect the SmartPoint AP to ZoneDirector via wired L2 or L3 network.
- Once an LWAPP tunnel between the AP and ZoneDirector has been established, ZoneDirector automatically pushes the corresponding USB drivers, network connection scripts and configuration files to the AP.
- The AP saves the files to its persistent storage.
- Disconnect the wired network connection, then reboot the AP.
- After reboot, the AP detects the appropriate drivers on its persistent storage, goes through the 3G/4G/LTE network connection process and establishes an LWAPP tunnel with ZoneDirector.
- ZoneDirector pushes the 802.11 wireless configuration to the AP.
- The AP implements the 802.11 wireless configuration and is ready to provide 802.11 wireless services.
- A wireless client connects to the AP's 802.11 wireless service, and the data traffic is tunneled to ZoneDirector through the LWAPP tunnel.