Setting Mesh Uplinks Manually
In a wireless mesh network, the default behavior of Mesh APs is to connect automatically
to a mesh node (either Mesh AP or Root AP) that provides the highest throughput. This
automatic connection is called "Smart Uplink Selection."
If you want to shape your mesh network or force a certain topology, you will need to disable Smart Uplink Selection and manually set the mesh nodes to which an AP can connect.
Note: Note that in most situations, Ruckus recommends against manually changing the roles
of APs in a mesh, because it can result in isolated Mesh APs.
Note: Do not manually set a Mesh AP as a Root AP. Only APs that are connected to ZoneDirector
via Ethernet (and on the same LAN segment) should be configured as Root APs. Mis-configuring
a Mesh AP or an eMAP as a Root AP can cause the AP to become isolated, or, in the
case of eMAP, can result in a network loop.
To set the mesh uplink for an AP manually:
- On the ZoneDirector web interface, click the Access Points tab.
- In the Access Points table, find the AP you want to restrict, and click Edit under the Actions column. The editing form appears below your selection.
- Under Advanced Options > Uplink Selection, select the Manual radio button. The other APs in the mesh appear below the selection.
- Select the check box for each AP that the current AP can use as uplink. If you set Uplink Selection for an AP to Manual and the uplink AP that you selected is off or unavailable, the AP status on the Access Points page will appear as Isolated Mesh AP.
- Click OK to save your settings.