Managing Access Points
In this section:
- Managing Access Points OverviewZoneDirector provides extensive options for managing APs individually or in AP groups.
- Adding New Access Points to the NetworkIf your staffing or wireless coverage needs increase, you can add APs to your network easily and efficiently.
- Working with Access Point GroupsAccess Point Groups can be used to define configuration options and apply them to groups of APs at once, without having to modify each AP's settings individually.
- Configuring Global Access Point PoliciesThe Access Point Policies options allow you to define how new APs are detected and approved for use in WLAN coverage, as well as policies on ZoneDirector discovery and communicating with ZoneDirector.
- Importing a USB Software PackageRuckus Access Points with USB ports ("SmartPoint" APs) can be configured to support a range of 3G, 4G/LTE, and WiMAX wireless USB devices for non-Wi-Fi wireless connection to a service provider's network.
- Managing Access Points IndividuallyYou can add a description, or change the channel selection, transmit power and Ethernet port settings of a managed access point by editing the AP's parameters. Additionally, you can manually assign an IP address or disable WLAN service entirely for a specific radio.
- Optimizing Access Point PerformanceThe ZoneDirector web interface allows you to remotely monitor and adjust key hardware settings on each of your network APs.