Enabling SNMP Trap Notifications

If you have an SNMP trap receiver on the network, you can configure ZoneDirector to send SNMP trap notifications to the server. Enable this feature if you want to automatically receive notifications for AP and client events that indicate possible network issues.
To enable SNMP trap notifications:
  1. In the Network Management section of the System > System Settings page, scroll down to the bottom of the page.
  2. Under SNMP Trap, select the Enable SNMP Trap check box.
  3. In SNMP Trap format, select either SNMPv2 or SNMPv3. You can select only one type of trap receiver.
    • If you select SNMPv2, you only need to enter the IP addresses of up to four SNMP trap receivers on your network.
    • If you select SNMPv3, enter up to four trap receiver IP addresses along with authentication method passphrase and privacy (encryption) settings.
  4. Click Apply to save your changes.