Recovering an Isolated Mesh AP

When a Mesh AP becomes isolated, it begins broadcasting a recovery SSID (named “recover.me-<last 6 digits of AP’s MAC address>”), which you can use to connect directly to the AP and make configuration changes.

Note that this SSID is not bridged to the local network for security reasons.

To perform these procedures, you will need:

  • A notebook computer with wireless capability.
  • The current ZoneDirector mesh configuration (steps for obtaining this information are provided below).
  • An SSH client, such as PuTTY or OpenSSH.
  • A text editor such as Notepad.