Configuring Syslogs for Firewall Integration

If enabled, ZoneDirector generates syslog messages upon acquisition, update or deletion of an IP address by a wireless station, which allows for enhanced integration with third-party firewall products for implementing client-specific security rules.

Station information is conveyed through a syslog message containing the following information: IPv4/v6 address, User name, MAC address, Operation Type (Add, Update, Del), AP/ZD MAC, OS Type.

To enable inclusion of client association logs in syslog messages:

  1. Go to Troubleshooting > Diagnostics.
  2. In Debug Logs, select the Client Association check box.
  3. Click Apply to save your changes.
    Note: You must also ensure that syslog delivery is enabled on the System > System Settings > Log Settings page and that the Priority level in Remote Syslog Advanced Settings is set to Info or All.

User Data Flow

The flow of user data from the end point to the firewall will use the following path:

  1. The user authenticates to an authentication server via the AP.
  2. ZoneDirector verifies the user’s identity.
  3. After the station authenticates successfully and gets an IP address, ZoneDirector generates a syslog message.
  4. The log is sent to a syslog server in real time.
  5. The script on the syslog server extracts user information from the log message and sends it to the firewall.
    A similar flow can be used to remove user mappings if the station sends a disconnect message.