Configuring Remote Syslog Advanced Settings

Advanced Syslog settings allow you to override the default Facility Name and Priority Level of messages sent to the syslog server. In this way, users can separate different kinds of syslogs according to the facility name on the syslog server side.
To configure remote syslog advanced settings:
  1. Go to System > System Settings.
  2. Scroll down to Log Settings, and expand the Remote Syslog Advanced Settings section.
  3. In ZoneDirector Settings, set the facility name as follows:
    • Keep Original: Retain the original facility name.
    • local0 - local7: Specify facility name.
  4. Set the priority level as follows:
    • All: Include all syslog messages.
    • 0(emerg), 1(alert), 2(crit), 3(err), 4(warning), 5(notice), 6(info), 7(debug): Lower numbers indicate higher priority. The syslog server will only receive logs whose priority levels are the same as or higher than the configured level.
  5. Repeat step 4 for Managed AP Settings. ZoneDirector and Access Points can use different facility and priority settings. All managed APs share the same facility and priority settings.