ZoneDirector supports several external network management options including Ruckus
SmartCell Insight, Northbound Portal, Unleashed Multisite Manager (UMM), SNMPv2, SNMPv3
and Telnet. These options are configured from the
System >
System Settings page by expanding the
Network Management link.
The following section describes how to enable these network management systems.
If your ZoneDirector will be used as a data source for Ruckus SmartCell Insight (SCI)
analytics engine, you can enable the SmartCell Insight Management feature to allow
ZoneDirector to initiate communications with SCI at set 15 minute intervals. In this
way, if ZoneDirector is behind a firewall or NAT device, it can still communicate
with SCI without having to reconfigure your firewalls and NAT devices to allow SCI
to contact the ZoneDirector.
If you have a Ruckus Unleashed Multi-site Manager (UMM; formerly known as FlexMaster)
server installed on the network, you can enable UMM management to centralize monitoring
and administration of multiple ZoneDirector controllers and other supported Ruckus
devices.
ZoneDirector provides support for Simple Network Management Protocol (SNMP v2 and
v3), which allows you to query ZoneDirector information such as system status, WLAN
list, AP list, and clients list, and to set a number of system settings using a Network
Management System (NMS) or SNMP MIB browser.
By default, Telnet is disabled due to security considerations, as SSH is the preferred
method if you need to access the ZoneDirector CLI. In some situations however, you
may want to enable Telnet.