Creating Layer 2/MAC Address Access Control Lists
Using the Access Controls configuration options, you can define Layer 2/MAC address
ACLs, which can then be applied to one or more WLANs (upon WLAN creation or edit).
ACLs are either allow-only or deny-only; that is, an ACL can be set up to allow only specified clients or to deny only specified clients. MAC addresses that are in the deny list are blocked at the AP, not at ZoneDirector.
To configure an L2/MAC ACL:
- Go to >
- Expand the L2-L7 Access Control section.
- In L2/MAC Access Control, click Create NewAlternatively, you can create a Layer 2/MAC ACL from the WLAN creation page while creating a new WLAN or modifying an existing WLAN ( > > > > > .)
- Type a Name for the ACL.
- Type a Description of the ACL.
- Select the Restriction mode as either allow or deny.
- Type a MAC address in the MAC Address text box, and then click Create New to save the address. The new MAC address that you added appears next to the Stations field. You can enter up to 128 MAC addresses per ACL.
- Click
OK to save the L2/MAC based ACL.You can create up to 32 L2/MAC ACL rules and each rule
can contain up to 128 MAC addresses. Each WLAN can be configured with one L2 ACL.