Using VLAN Override

There are many instances where Zonedirector manages multiple Access Points at different locations, and the deployment requires that the same SSID be broadcast by two or more APs at different locations with different VLAN tags.

In this case, you can use the VLAN Override settings in WLAN Groups to configure separate access VLANs for clients connecting to the same WLAN on different APs.

Assume ZoneDirector manages two Access Points, AP1 and AP2, and the network admin wants all wireless clients to be segmented into two subnets, VLAN 2 and VLAN 3, both with access to the same SSID, corporate_wireless. Clients connected to AP1 should be in VLAN 2, and those connected to AP2 should be in VLAN 3.

  1. Initially, configure a WLAN named corporate_wireless with Access VLAN tag "2". Go to Wireless LANs > Create WLAN > Advanced Options > Access VLAN, enter 2 in the VLAN ID field, and click OK to save your changes.
    At this point, all clients connected to the corporate_wireless SSID will be assigned to VLAN 2.
  2. Next, go to Wireless LANs > WLAN Groups, and create a new WLAN group. Choose the corporate_wireless WLAN and select the Tag option under the VLAN override column. Enter 3 in the VLAN ID field, and click OK to save your changes.
  3. Go to Access Points, and click the Configure button for AP2.
  4. Change the WLAN Group from System Default to the new WLAN group you created above.
  5. After this change, AP1 and AP2 will both broadcast the corporate_wireless SSID, but users will be segmented into different subnets.
  6. Repeat this procedure to segment more APs into additional VLANs.
    If you have many APs and do not want to override settings for each one individually, you can also configure separate AP Groups, and override the WLAN group configuration for all APs in that AP group.
Note: In the above example, ensure that VLAN 2 is tagged at the switch port connected to AP1 and VLAN 3 is tagged at the switch port connected to AP2.
Note: Ensure that the APs are located far enough away from one another so that clients do not conflict with different subnets.