Troubleshooting
In this section:
- Troubleshooting Failed User LoginsThis troubleshooting topic addresses the problems that network users might have with configuring their client devices and logging into your RUCKUS WLANs.
- Performing Client Connectivity DiagnosticsThis feature is designed to help customers diagnose wireless client connection issues to determine why a client fails to connect to the wireless network.
- Fixing User ConnectionsIf any of your users report problematic connections to the WLAN, the following debugging technique may prove helpful.
- Measuring Wireless Network Throughput with SpeedFlexSpeedFlex is a wireless performance tool included in ZoneDirector that you can use to measure actual real-world throughput performance between ZoneDirector and a wireless client, ZoneDirector and an AP, or a wireless client and an AP.
- Starting a Radio Frequency ScanThis task complements the automatic RF scanning feature that is built into the Ruckus ZoneDirector. That automatic scan assesses one radio frequency at a time, every 20 seconds (by default).
- Generating a Debug FileDo not start this procedure unless asked to do so by technical support staff.
- Viewing and Saving Current System LogsYou can display a list of recent ZoneDirector system activity logs from the ZoneDirector web interface and save the log file for troubleshooting analysis.
- Saving Client Connection LogsSaving client connection logs may be helpful in troubleshooting client connectivity issues.
- Viewing Current AP LogsYou can display a list of recent ZoneDirector AP activity logs from the ZoneDirector web interface and save the log file for troubleshooting analysis.
- Packet Capture and AnalysisThe Packet Capture feature puts one or more APs into packet sniffer mode, allowing them to capture packets and either save them to a local file or stream them to a packet inspection program such as Wireshark for later analysis.
- AP Diagnostic InformationThe AP Diagnostic Information feature can be used to collect AP processor core dump files from the AP via ZoneDirector. This section will be empty unless there is an AP that has experienced a core dump.
- Importing a ScriptThe Import Scripts feature can be used to help Ruckus Support in diagnosing customer network issues remotely by allowing the administrator to upload a Ruckus-created script to ZoneDirector themselves.
- Enabling Remote TroubleshootingThe Remote Troubleshooting feature allows Ruckus support personnel to connect directly to a ZoneDirector deployed at a customer’s site for troubleshooting purposes.
- Disabling SpeedFlexSpeedFlex service (enabled by default) can be disabled to prevent mobile or web clients from performing a SpeedFlex performance test.
- Restarting an Access PointOne helpful fix for network coverage issues is to restart individual APs. To do so, follow these steps:
- Restarting ZoneDirectorThere are three "restart" options: [1] to disconnect and then reconnect the ZoneDirector from the power source, [2] to follow this procedure which simultaneously shuts down ZoneDirector and all APs, then restarts all devices, and [3] a restart of individual APs (detailed in “Restarting an Access Point”.)