Restoring ZoneDirector to Default Factory Settings
In certain extreme conditions, you may want to re-initialize ZoneDirector and reset
it to factory default state.
In this state, the network is almost ready for use, but all your user/guest/log and other records, accounts and preference configurations would need to be manually reconfigured.
Note: Resetting ZoneDirector to factory default settings will erase all configuration changes
that you made, except for AP licenses and SSL certificates.
Note: When this procedure is complete, you will need to redo a complete setup. If ZoneDirector
is on a live network, a new IP address may be assigned to the system. In this case,
the system can be discovered by a UPnP client application, such as Windows “My Network
Places.” If there is no DHCP server on the connected network, the system's default
IP address is 192.168.0.2 with subnet mask 255.255.255.0.
Note: A complete set of instructions is available in the ZoneDirector Quick Start Guide
(QSG). Before restoring ZoneDirector to factory default settings, you should open
and print out the QSG pages. You can follow those instructions to set up ZoneDirector
after restoring factory defaults.
- Go to Administer > Backup.
- Locate the Restore to Factory Settings and click the button.
- When this factory reset process begins, you will be logged out of the web interface.
- When the reset is complete, the Status LED begins blinking green, indicating that
the system is in the "factory default" state. After you complete the Setup Wizard,
the Status LED will be steady green.