|
Sent from ZoneDirector in Access Request messages:
(1) User name (4) NAS IP Address (optional; prefer sending NAS ID) (5) NAS Port (6)
Service Type: hard-coded to be Framed-User(2) (12) Framed MTU: hard-coded to be 1400
(30) Called Station ID: user configurable (31) Calling Station ID: format is sta's
mac (32) NAS Identifier: user configurable (61) NAS Port Type: hard-coded to be 802.11
port (19) (77) Connection Info: indicates client radio type
==> (79) EAP payload
==> (24) State: if radius access-challenge in last received radius msg from AAA
(80) Message Authenticator (95) NAS IPv6 address (if using/talking to an IPv6 RADIUS
server) Ruckus private attribute: Vendor ID: 25053 Vendor Type / Attribute Number:
3 (Ruckus-SSID)
Sent from RADIUS server in Access Accept messages: (1) User name (7) WISPr Bandwidth-Max-Up:
Maximum transmit rate (bits/second) (8) WISPr Bandwidth-Max-Down: Maximum receive
rate (bits/second) (25) Class (27) Session-timeout & (29) Termination-action: Session-timeout
event becomes a disconnect event or re-authentication event if termination-action
indicates "(1) radius-request" (85) Acct-interim-interval For Dynamic VLAN application:
(64) Tunnel-Type: value only relevant if it is (13) VLAN (65) Tunnel-Medium-Type:
value only relevant if it is (6) 802 (as in all 802 media plus ethernet) (81) Tunnel-Private-Group-ID:
this is the VLAN ID assignment (per RFC, this is between 1 and 4094)
Administrator Authentication: Ruckus private attribute: Vendor ID: 25053 Vendor Type
/ Attribute Number: 1 (Ruckus-User-Groups) Value Format: group_attr1, group_attr2,
group_attr3, ... Cisco private attribute: Vendor ID: 9 Vendor Type/ Attribute Number:
1 (Cisco-AVPair) Value Format: shell:roles="group_attr1 group_attr2 group_attr3 ..."
|