Deploying a Smart Mesh Network
In this section:
- Overview of Smart Mesh NetworkingA Smart Mesh network is a peer-to-peer, multi-hop wireless network wherein participant nodes cooperate to route packets.
- Smart Mesh Networking TermsBefore you begin deploying your Smart Mesh network, Ruckus recommends getting familiar with the following terms that are used in this document to describe wireless mesh networks.
- Supported Mesh TopologiesSmart Mesh networks can be deployed in three types of topologies:
- Viewing the Mesh TopologyYou can view the current mesh topology from the Access Points page.
- Deploying a Wireless Mesh via ZoneDirectorDeploying a wireless mesh via ZoneDirector involves the following steps:
- Optional Mesh Configuration FeaturesThe following settings are disabled by default and are not necessary for standard mesh configuration. These settings can be used to fine-tune your mesh network to prevent issues such as excessive broadcast ARP (Address Resolution Protocol) requests, traffic looping and excessive number of mesh hops.
- Understanding Mesh-related AP Statuses
- Using the AP LEDs to Determine the Mesh StatusIn addition to checking the AP's mesh status from the ZoneDirector web interface, you can also check the LEDs on the APs.
- Using Action Icons to Configure and Troubleshoot APs in a Mesh
- Setting Mesh Uplinks ManuallyIn a wireless mesh network, the default behavior of Mesh APs is to connect automatically to a mesh node (either Mesh AP or Root AP) that provides the highest throughput. This automatic connection is called "Smart Uplink Selection."
- Troubleshooting Isolated Mesh APs
- Best Practices and Recommendations