SPoT Location Services
After completing purchase of the SPoT location service, you will be given account login information that you can use to log into the SPoT Administration Portal. The Admin Portal provides tools for configuring and managing all of your "Venues" (the physical locations in which SPoT service is deployed). After a Venue is successfully set up, you will need to enter the same Venue information in ZoneDirector.
The following section lists the steps required for configuring ZoneDirector to communicate with the SPoT Location Server.
To configure ZoneDirector for SPoT communication:
- Log in to the SPoT Administration Portal.
- On the Venues page, click Config next to the venue for which you want to configure ZoneDirector Location Services.
- Take note of the four values in Controller Settings.
- In the ZoneDirector web interface, go to > .
- In Location Services, click Create New.
- Enter the information from the SPot Admin Portal nto the four fields provided.
- Click OK to save your changes.
- Go to , and in Access Point Groups, click Create New or Edit to configure one or more AP groups for SPoT location services.
- Configure the AP group for SPoT communications. You will need to select 1 channel per radio for calibration, then after calibration is complete, select 3 channels per radio for normal operation (see SPoT User Guide for details).
- In Location Services, click Enable, then select the Venue you created on the > page.
- Click OK to save the AP group. ZoneDirector will begin trying to communicate with the SPoT Location Server.
- Once the APs have successfully connected to the SPoT server, you can view the status
of your SPoT-enabled APs on the
Location Services page.