Creating Static Route Entries

Static routes can be created to allow ZoneDirector to reach remote networks which can only be reached via a gateway other than default gateway. The gateway you use must be in the same subnet as either the ZoneDirector primary IP address or the Management IP address.
To create a static route to an additional gateway
  1. Go to System > System Settings and locate the Static Route section.
  2. Click Create New to create a new static route.
  3. Enter a Name for this access route.
  4. Enter a Subnet (in the format A.B.C.D/M (where M is the netmask).
  5. Enter the Gateway address.
  6. Click OK to save your changes. You can create up to 4 static route entries.