Step 4: Connect to the AP and update its Mesh settings
- Launch your SSH client and enter the IP address
10.154.231.125. - Log into the AP via SSH using the same user name and password that you use to log into the ZoneDirector web interface.
- Enter the command
set meshcfg ssid <current_ssid>, where "current_ssid" is the SSID that the mesh network is currently using. - Enter the command
set meshcfg passphrase <current_passphrase>, where "current_passphrase" is the passphrase that the mesh network is currently using. To paste text into PuTTY, press ctrl+v to paste, then click the right mouse button. - Enter the command
set mesh auto. - If there are multiple ZoneDirectors on the network, you may need to specify which
ZoneDirector the AP should connect to, using the command
set director ip <ZoneDirector’s IP address>. - If a management VLAN is used for ZoneDirector-AP management traffic, enter the following
command:
set ipaddr wan vlan <vlan ID>. - Enter the command
rebootto restart the AP with the new configuration changes. - Close the SSH client.