Create a Service Provider Profile

To create a Service Provider Profile:
  1. Go to Services & Profiles > Hotspot 2.0 Services
  2. Click Create New under Service Provider Profiles. Alternatively, you can create a Hotspot 2.0 Service Provider Profile from the WLAN creation page while creating a new WLAN or modifying an existing WLAN (Wireless LANs > Edit > Type > Hotspot 2.0 > Hotspot 2.0 Operator > Create New > Service Provider Profiles > Create New.)
  3. Configure the settings in to create a Service Provider profile. See the Hotspot 2.0 Service Provider profile configuration table below.
    Option Description
    Name Enter a name for this Service Provider profile.
    Description (Optional) Enter a description.
    NAI Realm List List of network access identifier (NAI) realms corresponding to SSPs or other entities whose networks or services are accessible via this AP. Up to five NAI realm entries can be created. Each NAI realm entry can contain up to four EAP methods. Each EAP method can contain up to four authentication types.
    Domain Name List List of domain names of the entity operating the access network. Up to five entries can be created.
    Roaming Consortium List List of Organization Identifiers included in the Roaming Consortium list, as defined in IEEE802.11u, dot11RoamingConsortiumTable. Up to two Roaming Consortium entries can be created.
    3GPP Cellular Network Information Contains cellular information such as network advertisement information to assist a 3GPP station in selecting an AP for 3GPP network access, as defined in Annex A of 3GPP TS 24.234 v8.1.0. Up to eight entries can be created.
  4. Click OK to save your changes.
  5. Continue to Create an Operator Profile.