Create a Hotspot 2.0 WLAN

After you create a HS2.0 service, you need to specify the WLANs to which you want to deploy the hotspot configuration. To configure an existing WLAN to provide hotspot service, do the following:
  1. Go to Wireless LANs.
  2. In the WLANs section, look for the WLAN that you want to assign as a HS2.0 WLAN, and then click the Edit link that is on the same row. The Editing (WLAN name) form appears.
  3. In Type, click Hotspot 2.0. 802.1X EAP is the only authentication method and WPA2/WPA3/AES are the only encryption methods available when you select Hotspot 2.0 WLAN type.
  4. In Hotspot 2.0 Operator, select the name of the Operator profile that you created previously, or click Create New to create a new HS2.0 Operator profile.
  5. In Authentication Server, select the RADIUS server used to authenticate users.
  6. Optionally, enable Proxy ARP for this Hotspot 2.0 WLAN (see Advanced WLAN Options under Creating a WLAN.)
    • If Proxy ARP is enabled, you also have the option to disable downstream group-addressed frame forwarding by selecting the DGAF option. This option prevents stations from forwarding group-addressed (multicast/broadcast) frames and converts group-addressed DHCP and ICMPv6 router advertisement packets from layer 2 multicast to unicast.
  7. Click OK to save your changes.