Currently Managed APs

Click on any AP in the Access Points list to view details on that specific AP.

The General tab provides the following information:

Access Points page AP details information

Heading Description
Device Name The AP's "name."
Status Displays the current status of the AP from ZoneDirector's perspective:
  • Approval Pending
  • Connected
  • Disconnected
  • Root AP
  • Mesh AP
  • eMesh AP
  • Number of hops
Uptime The amount of time since the last AP reboot or power cycle.
Description The AP's description, if configured.
Location / GPS Coordinates The AP's location, if configured. This can be modified by configuring GPS coordinates on the AP configuration page.
MAC Address The AP's MAC address.
IP Address The IP address of the AP.
External IP: Port The public IP address and port number for APs connected via Layer 3 behind a NAT device.
IPv6 Address The AP's IPv6 address, if IPv6 addressing is enabled.
IP Type The IP address acquisition method; dynamic (DHCP) or manual.
Connection Mode Layer 2 or Layer 3/4 connection method.
VLAN The VLAN ID, if configured.
Clients The number of clients currently connected to this AP.
Model The AP's model number.
USB Port USB port power status; on or off.
LACP/LAG Link aggregation status; enabled or disabled.
Power Consumption Mode The current AP power mode; DC power, 802.3af, 802.3at, etc.
S/N The AP's serial number.
Version The current firmware version on the AP.
Bonjour Gateway Indicates whether Bonjour Gateway service is enabled, disabled or not supported on this AP.
Bonjour Fencing Indicates whether Bonjour Fencing is enabled, disabled or not supported on this AP.
Action These icons allow you to configure and troubleshoot APs individually. See Using Action Icons to Configure APs.