Tagging Management Traffic to a VLAN

Assigning management traffic to a specific management VLAN can provide benefits to the overall performance and security of a network.

If your network is designed to segment management traffic to a specific VLAN and you want to include ZoneDirector's AP management traffic in this VLAN, you can set the parameters in the ZoneDirector system configuration. Assigning management traffic to a VLAN makes automatic AP provisioning more complicated, and should not be undertaken without a thorough understanding of your wired network configuration as well as the wireless deployment.

Configuring a management VLAN is not required. Access ports in a native VLAN can be used as the management VLAN rather than actually configuring a management VLAN.

To assign ZD - AP management traffic to a management VLAN:

  1. Go to Access Points.
  2. In AP Policies, click VLAN ID next to Management VLAN, and enter the VLAN ID in the field provided.
  3. Click Apply to save your settings.
  4. Go to System > System Settings.
  5. In Device IP Settings, enter the VLAN ID in the Access VLAN field.
  6. If you are using an additional management interface for ZoneDirector, enter the same ID in the Access VLAN field for the additional management interface.
  7. Click Apply to save your settings.
    Note: ZoneDirector will need to be rebooted after changing management VLAN settings.
  8. Go to Administer > Restart, and click Restart to reboot ZoneDirector.
    Caution: When configuring or updating the management VLAN settings, make sure that the same VLAN settings are applied on the Access Points > Access Point Policies > Management VLAN page, if APs exist on the same VLAN as ZoneDirector.