Troubleshooting Failed User Logins

This troubleshooting topic addresses the problems that network users might have with configuring their client devices and logging into your RUCKUS WLANs.

Upon the completion of the Setup Wizard, ZoneDirector automatically activates a default internal WLAN for authorized users.

A key benefit of the internal WLAN is the Zero-IT feature, which allows new users to self-activate their wireless client devices with little or no assistance from the IT department. Zero-IT client device configuration requires that the client be running a compatible operating system and using a wireless network adapter that implements WPA2 encryption.

If you and your WLAN users run into initial connection failures when using the Zero-IT configuration and login, many of the problems have two key causes:

  • Your users' client devices are running another OS, such as Linux, ChromeOS, etc.
  • Your users' client devices are using wireless network adapters without a WPA implementation.
The following list of options may be applicable based on your client system’s qualifications:
  • Option 1: If the client is running a supported operating system, check the wireless network adapter to verify the implementation of WPA.
  • Option 2: Upgrade to Windows 7 or later, and if needed, acquire a wireless network adapter with WPA2 support. Once these changes are made, your users can attempt Zero-IT activation again.
  • Option 3: If an older version of Windows is in use, or if another OS is being used, the user must manually enter the WPA2 passphrase in their network configuration.
  • Option 4: If the client's OS cannot be upgraded and the wireless adapter is limited to WEP, you will need to do the following:
    • Create an additional WEP WLAN for non-standard client connections, then create a Role that refers to this WLAN, and assign that role to the relevant user accounts.
    • Enter the WEP key in the network configuration on the client device.