Rogue DHCP Server Detection
When a rogue DHCP server is introduced to the network, it could start assigning invalid IP addresses, disrupting network connections or preventing client devices from accessing network services. It could also be used by hackers to compromise network security. Typically, rogue DHCP servers are network devices (such as routers) with built-in DHCP server capability that has been enabled (often, unknowingly) by users. ZoneDirector has a rogue DHCP server detection feature that can help you prevent connectivity and security issues that rogue DHCP servers may cause. When this feature is enabled, ZoneDirector scans the network every five seconds for unauthorized DHCP servers and generates an event every time it detects a rogue DHCP server.
The conditions for detecting rogue DHCP servers depend on whether ZoneDirector's own DHCP server is enabled:
- If the built-in DHCP server is enabled, ZoneDirector will generate an event when it detects any other DHCP server on the network.
- If the built-in DHCP server is disabled, ZoneDirector will generate events when it detects two or more DHCP servers on the network. You will need to find these DHCP servers on the network, determine which ones are rogue, and then disconnect them or shut down the DHCP service on them.
To enable rogue DHCP server detection on ZoneDirector (enabled by default):
- Go to > .
- In the Rogue DHCP Server Detection section, select the Enable rogue DHCP server detection check box.
- Click the Apply button that is in the same section.
Rogue DHCP server on [IP_address] has been detected.
If the check box is cleared, ZoneDirector will not generate these events.