Spectrum Analysis
Spectrum analysis provides two real time views of the RF environment using data generated
by the AP to chart power levels across the 2.4 and 5GHz frequency bands.
- Instantaneous Samples View (top view): The instantaneous samples plot provides a real time display of signal power across the entire 2.4 or 5GHz frequency bands. The plot is color-coded based on the signal power within each part of the frequency band. Red represents stronger signals while weaker signals are closer to blue.
- CDF of Samples View (bottom view): This graph displays the concentration of signal power readings within each portion of the frequency band in a cumulative distribution format. The CDF plot is color-coded based upon the frequency with which each point is observed during consecutive spectral sweeps of the entire 2.4/5Ghz frequency band. Frequently occurring points are marked 'red', moderately occurring points are marked 'yellow', and occasionally occurring points are marked 'green'.
To view spectrum analysis data for an access point:
- Go to and click the MAC address of the AP to view the AP detailed information.
- Click the Spectrum Analysis icon in the "Actions" table. (APs that do not support this feature do not display this icon).
- The Spectrum Analysis display opens in a new window.
- Select 2.4G or 5G to choose the frequency band for which spectrum analysis data will be collected, and click Start Monitoring to begin.