RUCKUS ZoneDirector 10.5.1 User Guide
- Preface Ruckus
- About This Document
- 4 About This Guide
- 4.1 Overview
- 4.2 Related Documentation
- 4.3 New in This Document
- 4 About This Guide
- 5 Introducing ZoneDirector
- 5.1 Overview of ZoneDirector
- 5.3 Introduction to the Ruckus Network
- 5.5 Ensuring That APs Can Communicate with ZoneDirector
- 5.5.1 How APs Discover ZoneDirector on the Network
- 5.5.2 How to Ensure that APs Can Discover ZoneDirector on the Network
- 5.5.2.1 Option 1: Perform Auto Discovery on Same Subnet then Transfer the AP to Intended Subnet
- 5.5.2.2 Option 2: Customize Your DHCP Server
- 5.5.2.2.1 Configuring the DHCP Server for ZoneDirector-AP Communication
- 5.5.2.2.2 For ZoneDirector information (sub-option code 03)
- 5.5.2.2.3 For UMM information (sub-option code 01)
- 5.5.2.2.4 Configure Vendor Class Identifier and Vendor Specific Info sub-options on Microsoft DHCP server
- 5.5.2.2.5 IPv6 Configuration for ZoneDirector Discovery Using DHCPv6
- 5.5.2.3 Option 3: Register ZoneDirector with a DNS Server
- 5.5.3 Firewall Ports that Must be Open for ZoneDirector Communications
- 5.7 Using the ZoneDirector Web Interface
- 5.7.1 Navigating the Dashboard
- 5.8 Registering Your Product
- 6 Managing Access Points
- 6.1 Managing Access Points Overview
- 6.2 Adding New Access Points to the Network
- 6.3 Working with Access Point Groups
- 6.3.1 Modifying the System Default AP Group
- 6.3.2 Creating a New Access Point Group
- 6.3.3 Modifying Access Point Group Membership
- 6.3.4 Modifying Model Specific Controls
- 6.3.4.1 Configuring AP Ethernet Ports
- 6.3.4.1.1 DHCP Option 82
- 6.3.4.1.1.1 DHCP Option 82 Sub Options
- 6.3.4.1.2 Designating Ethernet Port Type
- 6.3.4.1.2.1 Trunk Ports
- 6.3.4.1.2.2 Access Ports
- 6.3.4.1.2.3 General Ports
- 6.3.4.1.3 Using Port Based 802.1X
- 6.3.4.1.3.1 AP Ethernet Port as Authenticator
- 6.3.4.1.3.2 AP Ethernet Port as Supplicant
- 6.3.4.1.4 Viewing AP Ethernet Port Status
- 6.3.4.1.1 DHCP Option 82
- 6.3.4.2 Configuring AP USB Ports
- 6.3.4.1 Configuring AP Ethernet Ports
- 6.4 Configuring Global Access Point Policies
- 6.5 Importing a USB Software Package
- 6.6 Managing Access Points Individually
- 6.7 Optimizing Access Point Performance
- 7 Managing a Wireless Local Area Network
- 7.1 Overview of Wireless Networks
- 7.2 About RUCKUS WLAN Security
- 7.3 Creating a Wireless LAN
- 7.3.1 General Options
- 7.3.2 WLAN Usage Types
- 7.3.2.1 Autonomous WLANs
- 7.3.3 Authentication Method
- 7.3.3.1 Fast BSS Transition
- 7.3.3.2 Authentication Options
- 7.3.4 Encryption Options
- 7.3.4.1 Method
- 7.3.4.2 Algorithm
- 7.3.4.3 SAE Passphrase (Only for WPA3 and WPA2/WPA3-Mixed WLANs)
- 7.3.4.4 WEP Key/Passphrase
- 7.3.4.5 802.11w Management Frame Protection
- 7.3.5 Advanced WLAN Options
- 7.3.5.1 Bypass Apple CNA
- 7.3.5.2 PMK Caching and Opportunistic Key Caching
- 7.4 Creating a Copy of an Existing WLAN for Workgroup Use
- 7.5 Customizing WLAN Security
- 7.6 Working with WLAN Groups
- 7.7 Deploying ZoneDirector WLANs in a VLAN Environment
- 7.7.1 Tagging Management Traffic to a VLAN
- 7.7.2 Using VLAN Override
- 7.7.3 How Dynamic VLAN Works
- 7.7.3.1 Priority of VLAN Dynamic VLAN and Tunnel Mode
- 7.7.3.2 How It Works
- 7.7.3.3 Required RADIUS Attributes
- 7.7.4 Working with VLAN Pools
- Managing User Acces
- 8 Managing User Access
- 8.1 Enabling Automatic User Activation with Zero-IT
- 8.2 Working with Dynamic Pre-Shared Keys
- 8.3 Adding New User Accounts to ZoneDirector
- 8.3.1 Internal User Database
- 8.4 Managing Current User Accounts
- 8.5 Creating New User Roles
- 8.6 Managing Generated Dynamic PSKs
- 8.7 Managing Generated Guest Passes
- 8.8 Using an External Server for User Authentication
- 8.9 Enabling Web Authentication
- 8 Managing User Access
- 9 Managing Guest Access
- 9.1 Configuring Guest Access
- 9.2 Creating a Guest Access Service
- 9.3 Creating a Guest WLAN
- 9.4 Using the BYOD Onboarding Portal
- 9.5 Working with Guest Passes
- 9.5.1 Generating a Guest Pass from the Clients Page
- 9.5.2 Configuring Guest Pass Generation
- 9.5.3 Generating and Delivering a Single Guest Pass
- 9.5.4 Generating and Printing Multiple Guest Passes at Once
- 9.5.4.1 Creating a Guest Pass Profile
- 9.5.5 Monitoring Generated Guest Passes
- 9.5.6 Creating a Custom Guest Pass Printout
- 9.5.6.1 Guest Pass Printout Tokens
- 9.5.7 Delivering Guest Passes via Email
- 9.5.8 Delivering Guest Passes via SMS
- 9.6 Social Auth WLANs
- 9.7 Working with Hotspot Services
- 9.8 Creating a Hotspot 2.0 Service
- 9.9 Customizing the Captive Portal
- 10 Troubleshooting
- 10.1 Troubleshooting Failed User Logins
- 10.2 Performing Client Connectivity Diagnostics
- 10.3 Fixing User Connections
- 10.4 Measuring Wireless Network Throughput with SpeedFlex
- 10.5 Starting a Radio Frequency Scan
- 10.6 Generating a Debug File
- 10.7 Viewing and Saving Current System Logs
- 10.8 Saving Client Connection Logs
- 10.9 Viewing Current AP Logs
- 10.10 Packet Capture and Analysis
- 10.10.1 Local Capture
- 10.10.2 Streaming Mode
- 10.10.2.1 Using Ruckus Custom Indicators
- 10.11 AP Diagnostic Information
- 10.12 Importing a Script
- 10.13 Enabling Remote Troubleshooting
- 10.14 Disabling SpeedFlex
- 10.15 Restarting an Access Point
- 10.16 Restarting ZoneDirector
- Configuring Security and Other Services
- 11 Configuring Services and Profiles
- 11.1 Application Recognition and Control
- 11.1.1 Configure Application Policies
- 11.1.1.1 Configuring an Application Policy
- 11.1.1.2 Applying an Application Policy to a WLAN
- 11.1.2 Configure IP Based User Defined Applications
- 11.1.3 Configure Port Based User Defined Applications
- 11.1.4 Well-Known Service and Destination Port Mappings Defined in Application Visibility
- 11.1.1 Configure Application Policies
- 11.2 Configuring Network Access Controls
- 11.3 URL Filtering
- 11.4 Configuring Maps
- 11.4.1 Configuring Floorplan Maps
- 11.5 Guest Access
- 11.6 Hotspot Services
- 11.7 Mesh Configuration
- 11.8 Using an External AAA Server
- 11.8.1 Active Directory
- 11.8.1.1 Active Directory for 802.1X
- 11.8.1.2 Single Domain Active Directory Authentication
- 11.8.1.3 Multi-Domain Active Directory Authentication
- 11.8.2 LDAP
- 11.8.2.1 Advanced LDAP Filtering
- 11.8.2.2 Group Extraction
- 11.8.3 RADIUS /RADIUS Accounting
- 11.8.3.1 Configuring a Backup RADIUS/RADIUS Accounting Server
- 11.8.3.2 MAC Authentication with an External RADIUS Server
- 11.8.3.3 Using 802.1X EAP + MAC Address Authentication
- 11.8.3.4 Using 802.1X with EAP-MD5
- 11.8.3.5 RADIUS Attributes
- 11.8.3.5.1 RADIUS Authentication attributes
- 11.8.3.5.2 RADIUS Accounting attributes
- 11.8.3.6 Configuring Microsoft IAS for PAP Authentication
- 11.8.4 TACACS+
- 11.8.5 Testing Authentication Settings
- 11.8.1 Active Directory
- 11.9 Services
- 11.9.1 Self Healing
- 11.9.1.1 Automatically Adjust AP Power
- 11.9.1.2 Automatic Channel Selection
- 11.9.1.2.1 Background Scanning
- 11.9.1.2.2 ChannelFly
- 11.9.2 Load Balancing
- 11.9.3 Band Balancing
- 11.9.3.1 Adaptive Band Balancing
- 11.9.4 Radar Avoidance Pre-Scanning
- 11.9.5 AeroScout RFID Tag Detection
- 11.9.6 Ekahau Tag Detection
- 11.9.7 Active Client Detection
- 11.9.8 Tunnel Configuration
- 11.9.9 Packet Inspection Filter
- 11.9.1 Self Healing
- 11.10 Configuring Wireless Intrusion Prevention
- 11.10.1 DoS Protection
- 11.10.2 Intrusion Detection and Prevention
- 11.10.2.1 Rogue Access Points
- 11.10.3 Rogue DHCP Server Detection
- 11.11 DHCP Relay
- 11.12 Bonjour Gateway
- 11.12.1 Bridge Service Rules
- 11.12.2 Bridge Service Records
- 11.12.3 Creating a Bonjour Gateway Rule - ZD Site
- 11.12.4 Creating a Bonjour Gateway Rule AP Site
- 11.12.5 Applying a Bonjour Policy to an AP
- 11.12.6 Example Network Setup
- 11.13 Bonjour Fencing
- 11.14 SPoT Location Services
- 11.1 Application Recognition and Control
- 11 Configuring Services and Profiles
- 12 Configuring System Settings
- 12.1 System Configuration Overview
- 12.1.1 Changing the System Name
- 12.2 Changing the Network Addressing
- 12.3 Creating Static Route Entries
- 12.3.1 Static Route Example
- 12.4 Enabling Smart Redundancy
- 12.5 Configuring the Built-in DHCP Server
- 12.5.1 Enabling the Built-in DHCP server
- 12.5.2 Viewing DHCP Clients
- 12.6 Controlling ZoneDirector Management Access
- 12.7 Setting the System Time
- 12.8 Setting the Country Code
- 12.8.1 Channel Optimization
- 12.9 Configuring System Log Settings
- 12.9.1 Reviewing the Current Log Contents
- 12.9.2 Customizing the Current Log Settings
- 12.9.2.1 Configuring Remote Syslog Advanced Settings
- 12.9.2.2 Configuring Syslogs for Firewall Integration
- 12.9.2.2.1 Log Format
- 12.10 Setting Up Email Alarm Notifications
- 12.10.1 Customizing Email Alarms
- 12.11 Configuring SMS Settings for SMS Guest Pass Delivery
- 12.12 Enabling Login Warning Messages
- 12.13 Configuring Dashboard Map Settings
- 12.14 Enabling Network Management Systems
- 12.14.1 Enabling SmartCell Insight Communication
- 12.14.2 Enabling Management via UMM
- 12.14.3 Enabling Northbound Portal Interface Support
- 12.14.4 Configuring SNMP Support
- 12.14.4.1 Enabling the SNMP Agent
- 12.14.4.2 Enabling SNMP Trap Notifications
- 12.14.4.2.1 Trap Notifications That ZoneDirector Sends
- 12.14.5 Enabling Telnet
- 12.1 System Configuration Overview
- 13 Setting Administrator Preferences
- 13.1 Changing the Web Interface Display Language
- 13.2 Changing the ZoneDirector Administrator User Name and Password
- 13.3 Working with Backup Files
- 13.4 Restoring ZoneDirector to Default Factory Settings
- 13.5 Upgrading ZoneDirector and Connected APs
- 13.6 Working with Licenses and Support
- 13.6.1 Upgrading the AP License
- 13.6.2 Support Entitlement
- 13.6.3 Working with URL Filtering Licenses
- 13.7 Working with SSL Certificates
- 14 Monitoring Your Wireless Network
- 14.1 Reviewing the ZoneDirector Monitoring Options
- 14.2 Monitoring Access Points
- 14.2.1 Using the AP Status Overview Page
- 14.2.1.1 Currently Managed APs
- 14.2.1.2 Exporting the AP List to a CSV File
- 14.2.1.3 Currently Managed AP Groups
- 14.2.1.4 Events/Activities
- 14.2.2 Monitoring Individual APs
- 14.2.2.1 Using Action Icons to Manage and Troubleshoot APs
- 14.2.2.2 RF Pollution FAQ
- 14.2.2.3 Spectrum Analysis
- 14.2.2.4 Neighbor APs
- 14.2.2.5 Access Point Sensor Information
- 14.2.1 Using the AP Status Overview Page
- 14.3 Monitoring WLAN Status
- 14.4 Reviewing Current User Activity
- 14.4.1 Active Client Action Icons
- 14.4.2 Viewing Application Usage Statistics
- 14.4.2.1 Viewing Application Usage by Client
- 14.4.2.2 Viewing the Top 10 Clients by Usage
- 14.4.3 Monitoring Individual Clients
- 14.4.3.1 Monitoring Client Performance
- 14.5 Monitoring Wired Clients
- 14.6 Monitoring AAA Server Statistics
- 14.7 Reviewing Recent System Events
- 14.8 Reviewing Current Alarms
- 14.9 Monitoring Location Services
- 14.10 Monitoring Mesh Status
- 14.11 Real Time Monitoring
- 14.12 Detecting Rogue Access Points
- 14.13 Monitoring System Information
- 15 Deploying a Smart Mesh Network
- 15.1 Overview of Smart Mesh Networking
- 15.2 Smart Mesh Networking Terms
- 15.3 Supported Mesh Topologies
- 15.3.1 Standard Topology
- 15.3.2 Wireless Bridge Topology
- 15.3.3 Hybrid Mesh Topology
- 15.4 Viewing the Mesh Topology
- 15.5 Deploying a Wireless Mesh via ZoneDirector
- 15.6 Optional Mesh Configuration Features
- 15.7 Understanding Mesh-related AP Statuses
- 15.8 Using the AP LEDs to Determine the Mesh Status
- 15.8.1 On Dual-band Ruckus APs
- 15.8.1.1 Indoor Dual-band APs
- 15.8.1.2 Outdoor Dual-band APs
- 15.8.1 On Dual-band Ruckus APs
- 15.9 Using Action Icons to Configure and Troubleshoot APs in a Mesh
- 15.10 Setting Mesh Uplinks Manually
- 15.11 Troubleshooting Isolated Mesh APs
- 15.12 Best Practices and Recommendations
- 16 Mesh Networking Best Practices
- 17 Access Point Power Supply Considerations