Enabling Management via UMM

If you have a Ruckus Unleashed Multi-site Manager (UMM; formerly known as FlexMaster) server installed on the network, you can enable UMM management to centralize monitoring and administration of multiple ZoneDirector controllers and other supported Ruckus devices.

This version of ZoneDirector supports the following UMM-deployed tasks:

  • Firmware upgrade for both ZoneDirector and the APs that report to them
  • Reboot
  • Backup of ZoneDirector settings
  • Performance monitoring

When the UMM management option is enabled, you will still be able to access the ZoneDirector web interface to perform other management tasks. By default, UMM management is disabled.

To enable UMM management:

  1. Click System > System Settings.
  2. Scroll down to the bottom of the page.
  3. Click the Network Management link to expand the section.
  4. Under UMM Management, select the Enable management by UMM check box.
  5. In URL, type the UMM DNS host name or IP address of the UMM server.
  6. In Interval, type the time interval (in minutes) at which ZoneDirector will send status updates to the UMM server. The default interval is 15 minutes
  7. Click Apply. The message Setting Applied appears.
You have completed enabling UMM management on ZoneDirector. For more information on how to configure ZoneDirector from the UMM web interface, refer to the UMM documentation, available from https://suppport.ruckuswireless.com.