Enabling the SNMP Agent
SNMPv3 mainly provides security enhancements over the earlier version, and therefore requires you to enter authorization passwords and encryption settings instead of simple clear text community strings. Both SNMPv2 and SNMPv3 can be enabled at the same time. The SNMPv3 framework provides backward compatibility for SNMPv1 and SNMPv2c management applications so that existing management applications can still be used to manage ZoneDirector with SNMPv3 enabled. For a list of the MIB variables that you can get and set using SNMP, check the related SNMP documentation on the Ruckus Support site at http://support.ruckuswireless.com/documents.
To enable SNMPv2 management:
- Go to > . Scroll down to the bottom of the page and click the Network Management link to open the Network Management section.
- Under the SNMPv2 Agent section, select the Enable SNMP Agent check box.
- When the SNMPv2 Agent is enabled, the Inherit SNMPv2 for APs option appears. This option is enabled by default. Disabling it allows you to disable SNMP traps on all APs.
- Enter the following information:
- In
SNMP RO community (required), set the read-only community string. Applications that send SNMP Get-Requests
to ZoneDirector (to retrieve information) will need to send this string along with
the request before they will be allowed access. The default value is
public. - In
SNMP RW community (required), set the read-write community string. Applications that send SNMP Set-Requests
to ZoneDirector (to set certain SNMP MIB variables) will need to send this string
along with the request before they will be allowed access. The default value is
private. - In System Contact, type your email address (optional).
- In System Location, type the location of the ZoneDirector device (optional).
- In
SNMP RO community (required), set the read-only community string. Applications that send SNMP Get-Requests
to ZoneDirector (to retrieve information) will need to send this string along with
the request before they will be allowed access. The default value is
- Click
Apply to save your changes.
If your network uses SNMPv3
- Go to > . Scroll down to the bottom of the page and click the Network Management link to open the Network Management section.
- Under the SNMPv3 Agent section, select the Enable SNMP Agent check box.
- Enter the following information for both the Read Only and Read-Write privileges:
- User: Enter a user name between 1 and 31 characters.
- Authentication: Choose MD5 or SHA authentication method (default is MD5)
- Auth Pass Phrase: Enter a passphrase between 8 and 32 characters in length.
- Privacy: Choose DES, AES or None.
- Privacy Phrase: If either DES or AES is selected, enter a Privacy phrase between 8 and 32 characters in length.
- Click
Apply to save your changes.