Firewall Ports that Must be Open for ZoneDirector Communications

Depending on how your network is designed, you may need to open ports on any routers or firewalls located between ZoneDirector, the access points, and other network components.

The following table lists the ports that need to be open for different types of communications.

Firewall ports that must be open for ZoneDirector communications

Communication Ports
ZoneDirector Web UI access TCP ports 80 and 443 (HTTP and HTTPS)
AP < > ZoneDirector LWAPP UDP ports 12222 and 12223
AP < > ZoneDirector AP provisioning TCP port 443
AP < > ZoneDirector SpeedFlex UDP port 18301
AP < > ZoneDirector (AP) Legacy firmware upgrade (Disabled by default). TCP port 21 for FTP (the firewall must be stateful for PASV FTP transfers using a port higher than 1024)
AP < > ZoneDirector application statistics reporting TCP port 443
ZoneDirector < > ZoneDirector Smart Redundancy TCP port 443 and port 33003
ZoneDirector > UMM registration/inform/firmware upgrade TCP port 443
UMM > ZoneDirector management interface TCP port as specified in UMM Inventory 'Device Web Port Number Mapping'
ZoneDirector CLI access TCP port 22 (SSH)
TACACS+ server < > ZoneDirector TCP port 49 (TACACS+) (default)
ZoneDirector portal page access (for Guest and Web-based-authentication WLANs) TCP port 9999 (HTTP access) and port 8099 (HTTPS access)
ZoneDirector < > RADIUS server UDP ports 1812, 1813, 1815, and 3799
Note: Note: 1812 is for RADIUS authentication, 1813 is for RADIUS accounting, 1815 is for Radsec, 3799 is for RADIUS DM (Disconnect Messages) and COA (Change of Authorization).
ZoneDirector/AP > external syslog server UDP port 514
AP < > ZoneDirector location service TCP port 8883
AP > ZoneDirector secure AP image upgrade over HTTPS (Enabled by default) TCP port 11443
ZoneDirector CLI access (Telnet, disabled by default) TCP port 23
ZonerDirector SNMP Access UDP port 161