Detecting Rogue Access Points

"Rogue" (unauthorized) APs pose problems for a wireless network in terms of airtime contention as well as security.

Usually, a rogue AP appears in the following way: an employee obtains another manufacturer's AP and connects it to the LAN, to gain wireless access to other LAN resources. This would potentially allow even more unauthorized users to access your corporate LAN - posing a security risk. Rogue APs also interfere with nearby Ruckus APs, thus degrading overall wireless network coverage and performance.

ZoneDirector's rogue AP detection features help in identifying the presence of a rogue AP, categorizing it as either a known neighbor AP or as a malicious rogue, and locating it on your worksite floorplan prior to its physical removal.

To detect a rogue AP:

  1. Go to Services & Profiles > WIPS & Rogue Devices.
  2. There are three sections related to rogue devices:
    • Currently Active Rogue Devices: Lists all currently detected rogue APs.
    • Known/Recognized Rogue Devices: Lists rogue APs that have been marked as known, typically neighbor APs.
    • User Blocked Rogue Devices: Lists devices that have been marked as malicious by the user.
  3. Review the Currently Active Rogue Devices table. The following types of Rogue APs generate an alarm when ZoneDirector detects them (if the alarm has been enabled):
    • AP: A normal rogue AP. This rogue AP has not yet been categorized as malicious or non-malicious.
    • Malicious AP (SSID-spoof): A malicious rogue AP that uses the same SSID as ZoneDirector's AP, also known as an "Evil-twin" AP.
    • Malicious AP (Same-Network): A malicious rogue AP that is connected to the same wired network.
    • Malicious AP (MAC-spoof): A malicious rogue AP that has the same BSSID (MAC) as one of the virtual APs managed by ZoneDirector.
    • Malicious AP (User-Blocked): A rogue AP that has been marked as malicious by the user.
  4. To mark an AP as malicious, click Mark as Malicious. This AP will now be blocked and listed in the User Blocked Rogue Devices table. The malicious rogue AP protection mechanisms are automatically applied to all rogue APs categorized as "malicious," whether user-blocked or another type.
  5. If a listed AP is part of another, known neighbor network, click Mark as Known. This identifies the AP as posing no threat, while copying the record to the Known/Recognized Rogue Devices table.
You can now find the rogue APs and disconnect them. Or, if a rogue AP is actually a component of a neighboring network, you can mark it as "known."
Note: If your office or worksite is on a single floor in a multistory building, your upper- and lower-floor neighbors' wireless access points may show up on the Map View, but seemingly in your site. As the Map View cannot locate them in vertical space, you may mark them as "Known."
Note: To assist in physically locating rogue devices, click the plus sign (+) icon next to a detected rogue AP. This expands a list to display which APs have detected this rogue, sorted according to signal strength.