Services
In this section:
- Self HealingZoneDirector has the capability to perform automatic network adjustments to enhance performance and improve coverage by dynamically modifying power output and channel selection.
- Load BalancingEnabling load balancing can improve WLAN performance by helping to spread the client load between nearby access points, so that one AP does not get overloaded while another sits idle.
- Band BalancingBand balancing balances the client load on radios by distributing clients between the 2.4 GHz and 5 GHz radios.
- Radar Avoidance Pre-ScanningThe Radar Avoidance Pre-Scanning (RAPS) setting allows pre-scanning of DFS channels in the 5 GHz band to ensure the channel is clear of radar signals prior to transmitting on the channel.
- AeroScout RFID Tag DetectionAeroScout Tags are lightweight, battery-powered wireless devices that accurately locate and track people and assets.
- Ekahau Tag DetectionUtilizing Wi-Fi wireless network as an infrastructure, the Ekahau Real Time Location battery-powered devices that can be mounted on equipment or carried by personnel, and send out periodic Ekahau Blink frames. Wi-Fi Access Points receive and forward the Ekahau Blink frames to the Ekahau RTLS Controller, which calculates accurate locations for the tags.
- Active Client DetectionEnabling active client detection allows ZoneDirector to trigger an event when a client with a low signal strength joins the network.
- Tunnel ConfigurationOnly WLANs with Tunnel Mode enabled are affected.
- Packet Inspection FilterThe Packet Inspection Filter (PIF) allows configuration of rate limits for broadcast neighbor discovery (IPv4 Address Resolution Protocol and IPv6 Neighbor Solicit) packets. The PIF rate limiting threshold affects the following services:
Parent topic: Configuring Services and Profiles