Configuring Bonjour Fencing Policies

Bonjour Fencing requires a two-step process: create a policy, and then apply it to either an AP or an AP Group that will serve as the "anchor" for the Bonjour services.
To create a Bonjour Fencing policy:
  1. Go to Services & Profiles > Bonjour.
  2. In the Bonjour Fencing section, click Create New.
    The Create Bonjour Fencing Policy page appears.
  3. Configure the following:
    1. Name: Type a name for the policy.
    2. Description: Type a description for the policy.
    3. Fencing Rule: Create the policy rule by configuring the following:
      1. Click Create. The Create New (Fencing Rule) screen appears.
      2. Configure the following options:
        • Source Type: Select Wireless or Wired network connection method for the device advertising bonjour services.

          When you select Wired, you must also specify the MAC address of the device advertising bonjour services in Device MAC, and the access point that is physically closest to the wired device in Closest AP. Setting the closest AP creates a physical anchor point for fencing, and the closest AP is auto-detected for wireless devices, based on the AP association.

        • Service: Select one of the Bonjour services from the drop-down list.
          Note: If Google Chrome Cast service is selected for Bonjour fencing, then SSDP port 1900 will be blocked to prevent ChromeCast from initiating device discovery through SSDP protocol.
        • Fencing Range: Select the fencing range to be restricted to either the Same AP or 1-Hop AP Neighbors.
        • Description: Enter an optional description to describe the rule.
      3. Click OK.

        You have created the Bonjour Fencing policy rule.

    4. Click OK again to save the Bonjour Fencing Policy.
You have created a Bonjour Fencing policy with rules.
Next, you must configure an AP or AP group as the anchor for the policy, as described in Applying a Bonjour Fencing Policy to an AP or AP Group.