Step 3: Locate the AP's Mesh Recovery SSID
- In your notebook’s wireless connection list, locate the Mesh recovery SSID. The SSID will be named “Recover.Me-xxxxxx” (where xxxxxx is the last 6 digits of the AP’s MAC address).
- Connect to this WLAN using WPA and the passphrase ruckus-<admin password>. (The admin
password is the same as that used to log into ZoneDirector.)
Note: ZoneDirector allows passwords of less than 8 characters, but the recovery password has to be at least 8 characters. Therefore, if the password is less than 8 characters, hyphens (-) will be added to the passphrase to reach the 8 character minimum. For example, if the admin password is "admin", the recovery passhphrase would be "admin---".
- You can now access the AP’s web interface by entering the AP’s recovery IP address 10.154.231.125 in the browser.
Note: Note that because the AP is still in ZoneDirector-managed state, you cannot make configuration
changes via the web interface. Therefore you will need to proceed to the next step
and connect to the AP’s CLI to make changes.