Front Panel LEDs
The following table describes the LEDs on the front panel of ZoneDirector 1200.
ZoneDirector 1200 LED descriptions
| LED Label | State | Meaning |
|---|---|---|
| Power | Solid Green | ZoneDirector is receiving power. |
| Off | ZoneDirector is NOT receiving power. If the power cable or adapter is connected to a power source, verify that the power cable is connected properly to the power jack on the rear panel of ZoneDirector. | |
| Status | Solid Green | Normal state. |
| Flashing Green | ZoneDirector has not yet been configured. Log into the web interface, and then configure ZoneDirector using the setup wizard. | |
| Red | ZoneDirector has shut down (but is still connected to a power source). | |
| Flashing Red | ZoneDirector is starting up or shutting down. | |
| Ethernet Link | Solid Green or Amber | The port is connected to a device. |
| Flashing Green or Amber | The port is transmitting or receiving traffic | |
| Off | The port has no network cable connected or is not receiving a link signal. | |
| Ethernet Rate | Green | The port is connected to a 1000Mbps device. |
| Amber | The port is connected to a 100Mbps device. | |
| Off | The port is connected to a 10Mbps device. |