Find Technical Content
  • Home
  • Ruckus Support Portal
  • Ruckus Networks
  • Table of Contents
  • Dark Mode

Powered by Titania Delivery

⚠ This cached page may be outdated. Click refresh to get the latest content.
Cached Version You are Offline

You are viewing a cached version of this page.

You are currently offline. This page was loaded from cache.

RUCKUS ZoneDirector 10.5.1 User Guide 800-73085-001 Rev E

  • Preface Ruckus
    • 3 Contact Information, Resources, and Conventions
      • 3.1 Contacting RUCKUS Customer Services and Support
      • 3.2 Document Feedback
      • 3.3 RUCKUS Product Documentation Resources
      • 3.4 Online Training Resources
      • 3.5 Document Conventions
      • 3.6 Command Syntax Conventions
  • About This Document
    • 4 About This Guide
      • 4.1 Overview
      • 4.2 Related Documentation
      • 4.3 New in This Document
  • 5 Introducing ZoneDirector
    • 5.1 Overview of ZoneDirector
    • 5.3 Introduction to the Ruckus Network
    • 5.5 Ensuring That APs Can Communicate with ZoneDirector
      • 5.5.1 How APs Discover ZoneDirector on the Network
      • 5.5.2 How to Ensure that APs Can Discover ZoneDirector on the Network
        • 5.5.2.1 Option 1: Perform Auto Discovery on Same Subnet then Transfer the AP to Intended Subnet
        • 5.5.2.2 Option 2: Customize Your DHCP Server
          • 5.5.2.2.1 Configuring the DHCP Server for ZoneDirector-AP Communication
          • 5.5.2.2.2 For ZoneDirector information (sub-option code 03)
          • 5.5.2.2.3 For UMM information (sub-option code 01)
          • 5.5.2.2.4 Configure Vendor Class Identifier and Vendor Specific Info sub-options on Microsoft DHCP server
          • 5.5.2.2.5 IPv6 Configuration for ZoneDirector Discovery Using DHCPv6
        • 5.5.2.3 Option 3: Register ZoneDirector with a DNS Server
          • 5.5.2.3.1 Step 1: Set the DNS Domain Name on the DHCP Server
          • 5.5.2.3.2 Step 2: Set the DNS Server IP Address on the DHCP Server
          • 5.5.2.3.3 Step 3: Register the ZoneDirector IP Addresses with a DNS Server
      • 5.5.3 Firewall Ports that Must be Open for ZoneDirector Communications
    • 5.7 Using the ZoneDirector Web Interface
      • 5.7.1 Navigating the Dashboard
    • 5.8 Registering Your Product
  • 6 Managing Access Points
    • 6.1 Managing Access Points Overview
    • 6.2 Adding New Access Points to the Network
      • 6.2.1 Connecting the APs to the Network
      • 6.2.2 Verifying or Approving New APs
    • 6.3 Working with Access Point Groups
      • 6.3.1 Modifying the System Default AP Group
      • 6.3.2 Creating a New Access Point Group
      • 6.3.3 Modifying Access Point Group Membership
      • 6.3.4 Modifying Model Specific Controls
        • 6.3.4.1 Configuring AP Ethernet Ports
          • 6.3.4.1.1 DHCP Option 82
            • 6.3.4.1.1.1 DHCP Option 82 Sub Options
          • 6.3.4.1.2 Designating Ethernet Port Type
            • 6.3.4.1.2.1 Trunk Ports
            • 6.3.4.1.2.2 Access Ports
            • 6.3.4.1.2.3 General Ports
          • 6.3.4.1.3 Using Port Based 802.1X
            • 6.3.4.1.3.1 AP Ethernet Port as Authenticator
            • 6.3.4.1.3.2 AP Ethernet Port as Supplicant
          • 6.3.4.1.4 Viewing AP Ethernet Port Status
        • 6.3.4.2 Configuring AP USB Ports
    • 6.4 Configuring Global Access Point Policies
      • 6.4.1 Using Limited ZD Discovery for N+1 Redundancy
    • 6.5 Importing a USB Software Package
    • 6.6 Managing Access Points Individually
      • 6.6.1 Configuring Hotspot 2.0 Venue Settings for an AP
    • 6.7 Optimizing Access Point Performance
      • 6.7.1 Assessing Current Performance Using the Access Point Table
      • 6.7.2 Adjusting AP Settings
      • 6.7.3 Prioritizing WLAN Traffic
  • 7 Managing a Wireless Local Area Network
    • 7.1 Overview of Wireless Networks
    • 7.2 About RUCKUS WLAN Security
    • 7.3 Creating a Wireless LAN
      • 7.3.1 General Options
      • 7.3.2 WLAN Usage Types
        • 7.3.2.1 Autonomous WLANs
      • 7.3.3 Authentication Method
        • 7.3.3.1 Fast BSS Transition
        • 7.3.3.2 Authentication Options
      • 7.3.4 Encryption Options
        • 7.3.4.1 Method
        • 7.3.4.2 Algorithm
        • 7.3.4.3 SAE Passphrase (Only for WPA3 and WPA2/WPA3-Mixed WLANs)
        • 7.3.4.4 WEP Key/Passphrase
        • 7.3.4.5 802.11w Management Frame Protection
      • 7.3.5 Advanced WLAN Options
        • 7.3.5.1 Bypass Apple CNA
        • 7.3.5.2 PMK Caching and Opportunistic Key Caching
    • 7.4 Creating a Copy of an Existing WLAN for Workgroup Use
    • 7.5 Customizing WLAN Security
      • 7.5.1 Reviewing the Initial Security Configuration
      • 7.5.2 Fine Tuning the Current Security Mode
      • 7.5.3 Switching to a Different Security Mode
      • 7.5.4 Using the Built in EAP Server
      • 7.5.5 Authenticating with an External RADIUS Server
      • 7.5.6 If You Change the Internal WLAN to WEP or 802.1X
        • 7.5.6.1 If Switching to WEP-based Security
        • 7.5.6.2 If Switching to 802.1X-based Security
    • 7.6 Working with WLAN Groups
      • 7.6.1 Creating a WLAN Group
      • 7.6.2 Viewing a List of APs That Belong to a WLAN Group
    • 7.7 Deploying ZoneDirector WLANs in a VLAN Environment
      • 7.7.1 Tagging Management Traffic to a VLAN
      • 7.7.2 Using VLAN Override
      • 7.7.3 How Dynamic VLAN Works
        • 7.7.3.1 Priority of VLAN Dynamic VLAN and Tunnel Mode
        • 7.7.3.2 How It Works
        • 7.7.3.3 Required RADIUS Attributes
      • 7.7.4 Working with VLAN Pools
  • Managing User Acces
    • 8 Managing User Access
      • 8.1 Enabling Automatic User Activation with Zero-IT
        • 8.1.1 Clients that Support Zero-IT
        • 8.1.2 Self-Provisioning Clients with Zero-IT
        • 8.1.3 Self-Provisioning Clients without Ethernet Ports
        • 8.1.4 Provisioning Clients that Do Not Support Zero-IT
      • 8.2 Working with Dynamic Pre-Shared Keys
        • 8.2.1 Enabling Dynamic Pre-Shared Keys on a WLAN
          • 8.2.1.1 Using External DPSK with RADIUS Authentication
            • 8.2.1.1.1 External DPSK RADIUS Attribute Value Pairs
        • 8.2.2 Setting Dynamic Pre-Shared Key Expiration
        • 8.2.3 Generating Multiple Dynamic PSKs
          • 8.2.3.1 Creating a Batch Dynamic PSK Profile
        • 8.2.4 Downloading Generated DPSKs
      • 8.3 Adding New User Accounts to ZoneDirector
        • 8.3.1 Internal User Database
      • 8.4 Managing Current User Accounts
        • 8.4.1 Changing an Existing User Account
        • 8.4.2 Deleting a User Record
      • 8.5 Creating New User Roles
        • 8.5.1 Role Based Access Control Policy
      • 8.6 Managing Generated Dynamic PSKs
      • 8.7 Managing Generated Guest Passes
      • 8.8 Using an External Server for User Authentication
      • 8.9 Enabling Web Authentication
        • 8.9.1 Captive Portal Redirect on Initial Browser HTTPS Request
  • 9 Managing Guest Access
    • 9.1 Configuring Guest Access
    • 9.2 Creating a Guest Access Service
      • 9.2.1 Using Guest Pass Self-Service
        • 9.2.1.1 Accessing a Self-Service Guest WLAN
        • 9.2.1.2 Requiring Sponsor Approval for Self-Service Guest Pass Authentication
      • 9.2.2 Configuring Guest Subnet Restrictions
      • 9.2.3 Guest Access Walled Garden
    • 9.3 Creating a Guest WLAN
    • 9.4 Using the BYOD Onboarding Portal
    • 9.5 Working with Guest Passes
      • 9.5.1 Generating a Guest Pass from the Clients Page
      • 9.5.2 Configuring Guest Pass Generation
        • 9.5.2.1 Controlling Guest Pass Generation Privileges
        • 9.5.2.2 Creating a Guest Pass Generation User Role
        • 9.5.2.3 Assigning a Pass Generator Role to a User Account
      • 9.5.3 Generating and Delivering a Single Guest Pass
      • 9.5.4 Generating and Printing Multiple Guest Passes at Once
        • 9.5.4.1 Creating a Guest Pass Profile
      • 9.5.5 Monitoring Generated Guest Passes
      • 9.5.6 Creating a Custom Guest Pass Printout
        • 9.5.6.1 Guest Pass Printout Tokens
      • 9.5.7 Delivering Guest Passes via Email
      • 9.5.8 Delivering Guest Passes via SMS
    • 9.6 Social Auth WLANs
      • 9.6.1 About the Ruckus Facebook Wi-Fi Implementation
      • 9.6.2 OAuth Social Media Types
        • 9.6.2.1 Allowing Users From Specified Domains
        • 9.6.2.2 OAuth Setup Procedure for Google+ Social Media Login
        • 9.6.2.3 OAuth Setup Procedure for LinkedIn Social Media Login
        • 9.6.2.4 OAuth Setup Procedure for Microsoft Live Social Media Login
      • 9.6.3 Create an OAuth2.0 WLAN on ZoneDirector
      • 9.6.4 User Login to Social Media WLAN
      • 9.6.5 WeChat WLANs
        • 9.6.5.1 Connecting to a WeChat WLAN
    • 9.7 Working with Hotspot Services
      • 9.7.1 Creating a Hotspot Service
      • 9.7.2 Assigning a WLAN to Provide Hotspot Service
      • 9.7.3 Common WISPr Attribute Abbreviations
    • 9.8 Creating a Hotspot 2.0 Service
      • 9.8.1 Create a Service Provider Profile
      • 9.8.2 Create an Operator Profile
      • 9.8.3 Create a Hotspot 2.0 WLAN
    • 9.9 Customizing the Captive Portal
      • 9.9.1 Replacing the Captive Portal Logo
  • 10 Troubleshooting
    • 10.1 Troubleshooting Failed User Logins
    • 10.2 Performing Client Connectivity Diagnostics
    • 10.3 Fixing User Connections
      • 10.3.1 Troubleshooting Client Connections
      • 10.3.2 Using the Ping and Traceroute Tools
      • 10.3.3 If WLAN Connection Problems Persist
    • 10.4 Measuring Wireless Network Throughput with SpeedFlex
      • 10.4.1 Using SpeedFlex in a Multi-Hop Smart Mesh Network
      • 10.4.2 Allowing Users to Measure Their Own Wireless Throughput
    • 10.5 Starting a Radio Frequency Scan
    • 10.6 Generating a Debug File
    • 10.7 Viewing and Saving Current System Logs
    • 10.8 Saving Client Connection Logs
    • 10.9 Viewing Current AP Logs
    • 10.10 Packet Capture and Analysis
      • 10.10.1 Local Capture
      • 10.10.2 Streaming Mode
        • 10.10.2.1 Using Ruckus Custom Indicators
    • 10.11 AP Diagnostic Information
    • 10.12 Importing a Script
    • 10.13 Enabling Remote Troubleshooting
    • 10.14 Disabling SpeedFlex
    • 10.15 Restarting an Access Point
    • 10.16 Restarting ZoneDirector
  • Configuring Security and Other Services
    • 11 Configuring Services and Profiles
      • 11.1 Application Recognition and Control
        • 11.1.1 Configure Application Policies
          • 11.1.1.1 Configuring an Application Policy
          • 11.1.1.2 Applying an Application Policy to a WLAN
        • 11.1.2 Configure IP Based User Defined Applications
        • 11.1.3 Configure Port Based User Defined Applications
        • 11.1.4 Well-Known Service and Destination Port Mappings Defined in Application Visibility
      • 11.2 Configuring Network Access Controls
        • 11.2.1 Creating Layer 2/MAC Address Access Control Lists
        • 11.2.2 Creating Layer 3/Layer 4/IP Address Access Control Lists
        • 11.2.3 Configuring Device Access Policies
        • 11.2.4 Configuring Precedence Policies
        • 11.2.5 Blocking Client Devices
          • 11.2.5.1 Temporarily Disconnecting Specific Client Devices
          • 11.2.5.2 Permanently Blocking Specific Client Devices
          • 11.2.5.3 Reviewing a List of Previously Blocked Clients
        • 11.2.6 Configuring Client Isolation White Lists
      • 11.3 URL Filtering
        • 11.3.1 Creating a URL Filtering Profile
        • 11.3.2 Applying a URL Filtering Policy to a WLAN
        • 11.3.3 Applying a URL Filtering Policy to a Role
        • 11.3.4 Working with URL Filtering Licenses
      • 11.4 Configuring Maps
        • 11.4.1 Configuring Floorplan Maps
      • 11.5 Guest Access
      • 11.6 Hotspot Services
      • 11.7 Mesh Configuration
      • 11.8 Using an External AAA Server
        • 11.8.1 Active Directory
          • 11.8.1.1 Active Directory for 802.1X
          • 11.8.1.2 Single Domain Active Directory Authentication
          • 11.8.1.3 Multi-Domain Active Directory Authentication
        • 11.8.2 LDAP
          • 11.8.2.1 Advanced LDAP Filtering
          • 11.8.2.2 Group Extraction
        • 11.8.3 RADIUS /RADIUS Accounting
          • 11.8.3.1 Configuring a Backup RADIUS/RADIUS Accounting Server
          • 11.8.3.2 MAC Authentication with an External RADIUS Server
          • 11.8.3.3 Using 802.1X EAP + MAC Address Authentication
          • 11.8.3.4 Using 802.1X with EAP-MD5
          • 11.8.3.5 RADIUS Attributes
            • 11.8.3.5.1 RADIUS Authentication attributes
            • 11.8.3.5.2 RADIUS Accounting attributes
          • 11.8.3.6 Configuring Microsoft IAS for PAP Authentication
        • 11.8.4 TACACS+
        • 11.8.5 Testing Authentication Settings
      • 11.9 Services
        • 11.9.1 Self Healing
          • 11.9.1.1 Automatically Adjust AP Power
          • 11.9.1.2 Automatic Channel Selection
            • 11.9.1.2.1 Background Scanning
            • 11.9.1.2.2 ChannelFly
        • 11.9.2 Load Balancing
        • 11.9.3 Band Balancing
          • 11.9.3.1 Adaptive Band Balancing
        • 11.9.4 Radar Avoidance Pre-Scanning
        • 11.9.5 AeroScout RFID Tag Detection
        • 11.9.6 Ekahau Tag Detection
        • 11.9.7 Active Client Detection
        • 11.9.8 Tunnel Configuration
        • 11.9.9 Packet Inspection Filter
      • 11.10 Configuring Wireless Intrusion Prevention
        • 11.10.1 DoS Protection
        • 11.10.2 Intrusion Detection and Prevention
          • 11.10.2.1 Rogue Access Points
        • 11.10.3 Rogue DHCP Server Detection
      • 11.11 DHCP Relay
      • 11.12 Bonjour Gateway
        • 11.12.1 Bridge Service Rules
        • 11.12.2 Bridge Service Records
        • 11.12.3 Creating a Bonjour Gateway Rule - ZD Site
        • 11.12.4 Creating a Bonjour Gateway Rule AP Site
        • 11.12.5 Applying a Bonjour Policy to an AP
        • 11.12.6 Example Network Setup
      • 11.13 Bonjour Fencing
        • 11.13.1 Configuring Bonjour Fencing Policies
        • 11.13.2 Applying a Bonjour Fencing Policy to an AP or AP Group
      • 11.14 SPoT Location Services
  • 12 Configuring System Settings
    • 12.1 System Configuration Overview
      • 12.1.1 Changing the System Name
    • 12.2 Changing the Network Addressing
      • 12.2.1 IPv6 Configuration
      • 12.2.2 Enabling an Additional Management Interface
    • 12.3 Creating Static Route Entries
      • 12.3.1 Static Route Example
    • 12.4 Enabling Smart Redundancy
      • 12.4.1 Configuring ZoneDirector for Smart Redundancy
      • 12.4.2 Managing Smart Redundancy AP License Pools
    • 12.5 Configuring the Built-in DHCP Server
      • 12.5.1 Enabling the Built-in DHCP server
      • 12.5.2 Viewing DHCP Clients
    • 12.6 Controlling ZoneDirector Management Access
    • 12.7 Setting the System Time
      • 12.7.1 Configuring a User-Defined Time Zone
    • 12.8 Setting the Country Code
      • 12.8.1 Channel Optimization
    • 12.9 Configuring System Log Settings
      • 12.9.1 Reviewing the Current Log Contents
      • 12.9.2 Customizing the Current Log Settings
        • 12.9.2.1 Configuring Remote Syslog Advanced Settings
        • 12.9.2.2 Configuring Syslogs for Firewall Integration
          • 12.9.2.2.1 Log Format
    • 12.10 Setting Up Email Alarm Notifications
      • 12.10.1 Customizing Email Alarms
    • 12.11 Configuring SMS Settings for SMS Guest Pass Delivery
    • 12.12 Enabling Login Warning Messages
    • 12.13 Configuring Dashboard Map Settings
    • 12.14 Enabling Network Management Systems
      • 12.14.1 Enabling SmartCell Insight Communication
      • 12.14.2 Enabling Management via UMM
        • 12.14.2.1 Monitoring ZoneDirector Performance from UMM
      • 12.14.3 Enabling Northbound Portal Interface Support
      • 12.14.4 Configuring SNMP Support
        • 12.14.4.1 Enabling the SNMP Agent
        • 12.14.4.2 Enabling SNMP Trap Notifications
          • 12.14.4.2.1 Trap Notifications That ZoneDirector Sends
      • 12.14.5 Enabling Telnet
  • 13 Setting Administrator Preferences
    • 13.1 Changing the Web Interface Display Language
    • 13.2 Changing the ZoneDirector Administrator User Name and Password
      • 13.2.1 Using an External Server for Administrator Authentication
      • 13.2.2 Setting Administrator Login Session Timeout
    • 13.3 Working with Backup Files
      • 13.3.1 Backing Up a Network Configuration
      • 13.3.2 Restoring Archived Settings to ZoneDirector
        • 13.3.2.1 Restoring AP Configuration Settings Only
    • 13.4 Restoring ZoneDirector to Default Factory Settings
      • 13.4.1 Alternate Factory Default Reset Method
    • 13.5 Upgrading ZoneDirector and Connected APs
      • 13.5.1 Importing an AP Firmware Bundle
      • 13.5.2 Enabling Legacy AP Image Upgrade
      • 13.5.3 Performing an Upgrade with Smart Redundancy
    • 13.6 Working with Licenses and Support
      • 13.6.1 Upgrading the AP License
      • 13.6.2 Support Entitlement
      • 13.6.3 Working with URL Filtering Licenses
    • 13.7 Working with SSL Certificates
      • 13.7.1 Basic Certificate Installation
      • 13.7.2 Generating a Certificate Signing Request
      • 13.7.3 Importing an SSL Certificate
      • 13.7.4 SSL Certificate Advanced Options
        • 13.7.4.1 Importing Ruckus PKI Certificate Packages
        • 13.7.4.2 Wildcard Certificate Installation
          • 13.7.4.2.1 Wildcard Certificates In Smart Redundancy With Captive Portals
  • 14 Monitoring Your Wireless Network
    • 14.1 Reviewing the ZoneDirector Monitoring Options
    • 14.2 Monitoring Access Points
      • 14.2.1 Using the AP Status Overview Page
        • 14.2.1.1 Currently Managed APs
        • 14.2.1.2 Exporting the AP List to a CSV File
        • 14.2.1.3 Currently Managed AP Groups
        • 14.2.1.4 Events/Activities
      • 14.2.2 Monitoring Individual APs
        • 14.2.2.1 Using Action Icons to Manage and Troubleshoot APs
          • 14.2.2.1.1 Migrating an AP from ZoneDirector to Another Controller
        • 14.2.2.2 RF Pollution FAQ
        • 14.2.2.3 Spectrum Analysis
        • 14.2.2.4 Neighbor APs
        • 14.2.2.5 Access Point Sensor Information
    • 14.3 Monitoring WLAN Status
    • 14.4 Reviewing Current User Activity
      • 14.4.1 Active Client Action Icons
      • 14.4.2 Viewing Application Usage Statistics
        • 14.4.2.1 Viewing Application Usage by Client
        • 14.4.2.2 Viewing the Top 10 Clients by Usage
      • 14.4.3 Monitoring Individual Clients
        • 14.4.3.1 Monitoring Client Performance
    • 14.5 Monitoring Wired Clients
    • 14.6 Monitoring AAA Server Statistics
    • 14.7 Reviewing Recent System Events
    • 14.8 Reviewing Current Alarms
    • 14.9 Monitoring Location Services
    • 14.10 Monitoring Mesh Status
    • 14.11 Real Time Monitoring
    • 14.12 Detecting Rogue Access Points
    • 14.13 Monitoring System Information
      • 14.13.1 Monitoring System Ethernet Port Status
  • 15 Deploying a Smart Mesh Network
    • 15.1 Overview of Smart Mesh Networking
    • 15.2 Smart Mesh Networking Terms
    • 15.3 Supported Mesh Topologies
      • 15.3.1 Standard Topology
      • 15.3.2 Wireless Bridge Topology
      • 15.3.3 Hybrid Mesh Topology
    • 15.4 Viewing the Mesh Topology
    • 15.5 Deploying a Wireless Mesh via ZoneDirector
      • 15.5.1 Step 1: Prepare for Wireless Mesh Deployment
      • 15.5.2 Step 2: Enable Mesh Capability on ZoneDirector
      • 15.5.3 Step 3: Provision and Deploy Mesh Nodes
        • 15.5.3.1 Zero Touch Mesh
          • 15.5.3.1.1 Onboarding Mesh APs with Zero Touch Mesh
      • 15.5.4 Step 4: Verify That the Wireless Mesh Network Is Up
    • 15.6 Optional Mesh Configuration Features
    • 15.7 Understanding Mesh-related AP Statuses
    • 15.8 Using the AP LEDs to Determine the Mesh Status
      • 15.8.1 On Dual-band Ruckus APs
        • 15.8.1.1 Indoor Dual-band APs
        • 15.8.1.2 Outdoor Dual-band APs
    • 15.9 Using Action Icons to Configure and Troubleshoot APs in a Mesh
    • 15.10 Setting Mesh Uplinks Manually
    • 15.11 Troubleshooting Isolated Mesh APs
      • 15.11.1 Understanding Isolated Mesh AP Statuses
      • 15.11.2 Recovering an Isolated Mesh AP
        • 15.11.2.1 Step 1: Obtain the Mesh SSID and Passphrase
        • 15.11.2.2 Step 2: Ensure that the AP's Mesh Mode is set to Auto
        • 15.11.2.3 Step 3: Locate the AP's Mesh Recovery SSID
        • 15.11.2.4 Step 4: Connect to the AP and update its Mesh settings
    • 15.12 Best Practices and Recommendations
  • 16 Mesh Networking Best Practices
    • 16.1 Calculating the Number of APs Required
    • 16.2 Placement and Layout Considerations
    • 16.3 Signal Quality Verification
    • 16.4 Mounting and Orientation of APs
      • 16.4.1 Indoor APs - Typical Orientation
      • 16.4.2 Outdoor APs - Typical Horizontal Orientation
      • 16.4.3 Elevation of RAPs and MAPs
    • 16.5 Mesh Best Practice Checklist
  • 17 Access Point Power Supply Considerations
    • 17.1 AP Power Warnings
    • 17.2 Power Limitations by PoE Mode and AP Model

CommScope Legal Statements

© 2023 CommScope, Inc. All rights reserved.

No part of this content may be reproduced in any form or by any means or used to make any derivative work (such as translation, transformation, or adaptation) without written permission from CommScope, Inc. and/or its affiliates (“CommScope”). CommScope reserves the right to revise or change this content from time to time without obligation on the part of CommScope to provide notification of such revision or change.

Export Restrictions

These products and associated technical data (in print or electronic form) may be subject to export control laws of the United States of America. It is your responsibility to determine the applicable regulations and to comply with them. The following notice is applicable for all products or technology subject to export control:

   These items are controlled by the U.S. Government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. They may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.  

Disclaimer

THIS CONTENT AND ASSOCIATED PRODUCTS OR SERVICES ("MATERIALS"), ARE PROVIDED "AS IS" AND WITHOUT WARRANTIES OF ANY KIND, WHETHER EXPRESS OR IMPLIED. TO THE FULLEST EXTENT PERMISSIBLE PURSUANT TO APPLICABLE LAW, COMMSCOPE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, TITLE, NON-INFRINGEMENT, FREEDOM FROM COMPUTER VIRUS, AND WARRANTIES ARISING FROM COURSE OF DEALING OR COURSE OF PERFORMANCE. CommScope does not represent or warrant that the functions described or contained in the Materials will be uninterrupted or error-free, that defects will be corrected, or are free of viruses or other harmful components. CommScope does not make any warranties or representations regarding the use of the Materials in terms of their completeness, correctness, accuracy, adequacy, usefulness, timeliness, reliability or otherwise. As a condition of your use of the Materials, you warrant to CommScope that you will not make use thereof for any purpose that is unlawful or prohibited by their associated terms of use.

Limitation of Liability

IN NO EVENT SHALL COMMSCOPE, COMMSCOPE AFFILIATES, OR THEIR OFFICERS, DIRECTORS, EMPLOYEES, AGENTS, SUPPLIERS, LICENSORS AND THIRD PARTY PARTNERS, BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, PUNITIVE, INCIDENTAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES WHATSOEVER, EVEN IF COMMSCOPE HAS BEEN PREVIOUSLY ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, WHETHER IN AN ACTION UNDER CONTRACT, TORT, OR ANY OTHER THEORY ARISING FROM YOUR ACCESS TO, OR USE OF, THE MATERIALS. Because some jurisdictions do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of liability for consequential or incidental damages, some of the above limitations may not apply to you.

Trademarks

CommScope and the CommScope logo are registered trademarks of CommScope and/or its affiliates in the U.S. and other countries. For additional trademark information see https://www.commscope.com/trademarks.  All product names, trademarks, and registered trademarks are the property of their respective owners.

Patent Marking Notice

For applicable patents, see www.cs-pat.com.

Did you find what you were looking for?

Thanks!

Ruckus Wireless

© 2026 Ruckus Wireless LLC All rights reserved.

  • Accessibility
  • Privacy & Cookies
  • Do Not Sell My Information
  • Trademarks
  • Terms
  • Feedback