show pppoe intermediate-agent

Shows the Point-to-Point Protocol over Ethernet Interface Agent (PPPoE IA) information on the device or interface.
Syntax
show pppoe intermediate-agent {configuration|statistic} [ interface ]
Parameters
configuration
Shows the PPPoE IA configurations on all interfaces.
statistics
Shows the PPPoE IA statistics on all interfaces.
interface
Shows the PPPoE IA information on a specific interface.
Modes

User EXEC mode

Usage Guidelines

This command is supported for ICX 8200 devices only.

Examples

The following example displays the PPPoE IA configurations on all PPPoE IA-configured interfaces.

ICX8200-48ZP2 Router#show pppoe intermediate-agent configuration                
Interface Ethernet 1/1/11 : 
  PPPOE IA enabled: YES, trust: YES, vtag strip: YES
  remote_id: 
  circuit_id: 
Interface Ethernet 1/1/23 : 
  PPPOE IA enabled: YES, trust: NO, vtag strip: NO
  remote_id: remote01
  circuit_id: circuit01
ICX8200-48ZP2 Router#

The following example displays the PPPoE IA configuration on a specific interface.

ICX8200-48ZP2 Router#show pppoe intermediate-agent configuration ethernet 1/1/23
Interface Ethernet 1/1/23 : 
  PPPOE IA enabled: YES, trust: NO, vtag strip: NO
  remote_id: remote01
  circuit_id: circuit01
ICX8200-48ZP2 Router#

The following example displays the statistics for all PPPoE IA-configured interfaces.

ICX8200-48ZP2 Router#show pppoe intermediate-agent statistics
Interface Ethernet 1/1/11 : 
  all: 2, PADI: 0, PADO: 1, 
  PADR: 0, PADS: 1, PADT: 0, 
  packet dropped: 0, packet towards no trust: 0,
  packet from no trust: 0,
Interface Ethernet 1/1/23 : 
  all: 2, PADI: 1, PADO: 0, 
  PADR: 1, PADS: 0, PADT: 0, 
  packet dropped: 0, packet towards no trust: 0,
  packet from no trust: 0,

The following example displays the statistics for a specific PPPoE IA-configured interface.

ICX8200-48ZP2 Router#show pppoe intermediate-agent statistics ethernet 1/1/23
Interface Ethernet 1/1/23 : 
  all: 2, PADI: 1, PADO: 0, 
  PADR: 1, PADS: 0, PADT: 0, 
  packet dropped: 0, packet towards no trust: 0,
  packet from no trust: 0,
History
Release version Command history
10.0.20 This command was introduced.
Parent topic: Show Commands