always-propagate

Enables the device to reflect BGP routes even though they are not installed in the Routing Table Manager (RTM).
Syntax
always-propagate
no always-propagate
Command Default

This feature is disabled.

Modes

BGP configuration mode

BGP address-family IPv6 unicast configuration mode

BGP address-family IPv4 unicast VRF configuration mode

BGP address-family IPv6 unicast VRF configuration mode

Usage Guidelines

When this command is entered in BGP global configuration mode, it applies only to the IPv4 address family. Use this command in BGP address-family IPv6 unicast configuration mode for BGP4+ configurations.

This command can be configured in BGP L2VPN EVPN address family configuration mode for RUCKUSICX 7850 and ICX 7550 devices only.

The no form of the command restores the default.

Examples

The followin example configures the device to reflect routes that are not installed in the RTM. 

device# configure terminal
device(config)# router bgp
device(config-bgp-router)# always-propagate

The following example configures the device to reflect routes that are not installed in the RTM in IPv6 address-family unicast configuration mode. 

device# configure terminal
device(config)# router bgp
device(config-bgp-router)# address-family ipv6 unicast
device(config-bgp-ipv6u)# always-propagate

The following example configures the device to reflect routes that are not installed in the RTM in a nondefault VRF instance. 

device# configure terminal
device(config)# router bgp
device(config-bgp-router)# address-family ipv4 unicast vrf red
device(config-bgp-ipv4u-vrf)# always-propagate
History
Release version Command history
08.0.30 This command can also be configured in BGP address-family IPv6 unicast VRF configuration mode.
Parent topic: Commands A and B