show manager status

Displays the ICX-Manager IP address and the status of the connection with the ICX-Manager.
Syntax
show manager status
Modes

Privileged EXEC mode

Examples
The following example displays information about a connection to RUCKUS One.
ICX# show manager status

============    MGMT Agent State Info     ===================

Manager mode: ACX
Config Status:Enabled Operation Status:Enabled
State:NATS CONNECTED    Prev State:NATS CONNECTING      Event:ACX_HEARTBEAT_EVENT

SWR List                : device.ruckus.cloud 34.66.194.67
SWR fqdn                :
DNS List                :
Active FQDN List        : None
Backup FQDN List        : None
Active List             : None
Active List IPV6        : None
DHCP Option 43          : No
DHCP Opt 43 List        : None
Backup List             : None
Backup List IPV6        : None
Merged List             : device.ruckus.cloud 34.66.194.67

ACX Server Used         : device.ruckus.cloud
Port List               : 987
Server Port Used        : 443
SWR host                : sw-registrar.ruckuswireless.com
SWR discovery retry cnt : 0
SWR host retry time     : 0
Query Status            : Initiated

NATS Tunnel Status -:
Tunnel Status           : NATS CONNECTED
Websocket Port          : 4222
NATS Port               : 7681
RPCLI Status            : None
ACX Hbt Count           : 60408
ACX JWT Renew Count     : 4

Timer Status :-
Manager Query Timer Status       : None
Manager heartbeat Timer Status   : Running
Manager JWT Renewel Timer Status : Running
  ACX JWT Renewel Time    : 2023-05-19 18:13:22
The following example shows that the ICX switch is disconnected from RUCKUS One.
ICX# manager disconnect
Manager Disconnect Initiated...

ICX# show manager status

============    MGMT Agent State Info     ===================

Manager mode: ACX
Config Status:Enabled Operation Status:Disabled
State:DISABLED  Prev State:NATS CONNECTED       Event:ACX_DISABLE_EVENT

SWR List                : device.ruckus.cloud 34.66.194.67
SWR fqdn                :
DNS List                :
Active FQDN List        : None
Backup FQDN List        : None
Active List             : None
Active List IPV6        : None
DHCP Option 43          : No
DHCP Opt 43 List        : None
Backup List             : None
Backup List IPV6        : None
Merged List             : device.ruckus.cloud 34.66.194.67

ACX Server Used         :
Port List               : 987
Server Port Used        : 443
SWR host                : sw-registrar.ruckuswireless.com
SWR discovery retry cnt : 0
SWR host retry time     : 0
Query Status            : Not Initiated

NATS Tunnel Status -:
Tunnel Status           : None
Websocket Port          : 4222
NATS Port               : 7681
RPCLI Status            : None
ACX Hbt Count           : 60413
ACX JWT Renew Count     : 4

Timer Status :-
Manager Query Timer Status       : None
Manager heartbeat Timer Status   : None
Manager JWT Renewel Timer Status : None

The following example displays information about a connection with SmartZone.

device> show manager status

============    MGMT Agent State Info     ===================

Config Status:Enabled Operation Status:Enabled
State:SSH CONNECTED  Prev State:SSH CONNECTING              Event:SZ_SSH_CONNECT_EVENT

SWR List                            : None
DNS List                : 
Active List             : 10.176.160.116
Active List IPV6        : 2620:107:90d0:ab40::116
DHCP Option 43          : No
DHCP Opt 43 List        : None
Backup List             : None
Backup List IPV6        : None
Merged List             : 2620:107:90d0:ab40::116 10.176.160.116

SZ IP Used              : 2620:107:90d0:ab40::116
Port List               : 987
Server Port Used        : 443
Query Status            : APPROVED

SSH Tunnel Status -: 
Tunnel Status           : Established
CLI IP/Port             : 127.255.255.253/59449
SNMP IP/Port            : 127.255.255.254/8253
Syslog IP/Port          : 127.0.0.1/20514                         
HTTP CLIENT IP/Port     : 127.0.0.1/5080
HTTP SERVER IP/Port     : 127.255.255.252/63098
Timer Status            : Not Running
History
Release version Command history
08.0.80 This command was introduced as show sz status.
08.0.80c This command was modified to include the name of the switch registrar host.
08.0.92 The name of the command was changed to show manager status.
09.0.00 The command output was modified to include information for server ports.
09.0.10e The command output was modified to include additional information on Cloud (ACX) connection status.
10.0.10 The command output was modified to include additional information on RUCKUS One connection status.
Parent topic: Show Commands