ip interface loopback (VXLAN)

Configures the loopback interface for a VXLAN overlay-gateway.
Syntax
ip interface loopback interface-id
no ip interface loopback interface-id
Parameters
interface-id
Specifies the loopback interface ID.
Modes

Overlay-gateway configuration mode

Usage Guidelines

The no form of the command removes the configured loopback interface as overlay-gateway source interface.

The loopback interface must be configured prior to use in the overlay-gateway configuration.

The loopback interface cannot belong to a user VRF (it must belong to the default VRF).

Examples

The following example configures loopback interface 1 as the gateway source interface. 

device# configure terminal
device(config)# overlay-gateway gate1
device(config-overlay-gw-gate1)# type layer2-extension
device(config-overlay-gw-gate1)# map vlan 24 to vni 48
device(config-overlay-gw-gate1)# ip interface loopback 1
History
Release version Command history
08.0.70 This command was introduced.
Parent topic: Commands I