repeat daily
By default, the system assumes a profile of type one-time, which runs only once.
Time-profile configuration mode
During configuration of the time-profile, you
may enter the repeat command at any point prior to entering the
schedule command. On applying this configuration, the time
profile type changes from default one-time to recurring. This command will be
applied only if no other repeat configuration exists for the specified profile.
The no form of this command
deletes the daily recurrence configuration.
The following example shows how to create a
recurring time profile named "daily", configuring the profile to execute the
show
logging and clear logging
commands, and scheduling the profile to run at 7:00 am daily, beginning
September 30, 2024, and ending October 30, 2024.
device# configure terminal device(config)# time-profile daily device(config-time-profile-daily)# start-date 09-30-24 device(config-time-profile-daily)# execution-time 07:00 device(config-time-profile-daily)# command-list device(config-time-profile-daily-command-list)# add "show logging" device(config-time-profile-daily-command-list)# add "clear logging" device(config-time-profile-daily-command-list)# exit device(config-time-profile-daily)# repeat daily device(config-time-profile-daily)# termination-date 10-30-24 device(config-time-profile-daily)# schedule
| Release version | Command history |
|---|---|
| 10.0.20a | This command was introduced. |