manager connect
Connects the ICX device to
ICX-Management
Modes
Privileged EXEC mode
Global configuration mode
Usage Guidelines
When an ICX device is managed from RUCKUS One,
RUCKUS recommends that the manager connect and manager disconnect
commands be used to connect to and disconnect from ICX-Management. These two
commands, entered in Privileged EXEC mode or global configuration mode, do not
change the running configuration timestamp, which ICX-Management uses to determine
whether any configuration changes have been made on the ICX device.
Examples
The following example connects an ICX device to ICX-Management in RUCKUS One.
ICX# manager connect ICX# show manager status ============ MGMT Agent State Info =================== Manager mode: ACX Config Status:Enabled Operation Status:Enabled State:NATS CONNECTED Prev State:NATS CONNECTING Event:ACX_HEARTBEAT_EVENT SWR List : device.ruckus.cloud 34.66.194.67 SWR fqdn : DNS List : Active FQDN List : None Backup FQDN List : None Active List : None Active List IPV6 : None DHCP Option 43 : No DHCP Opt 43 List : None Backup List : None Backup List IPV6 : None Merged List : device.ruckus.cloud 34.66.194.67 ACX Server Used : device.ruckus.cloud Port List : 987 Server Port Used : 443 SWR host : sw-registrar.ruckuswireless.com SWR discovery retry cnt : 0 SWR host retry time : 0 Query Status : Initiated NATS Tunnel Status -: Tunnel Status : NATS CONNECTED Websocket Port : 4222 NATS Port : 7681 RPCLI Status : None ACX Hbt Count : 60408 ACX JWT Renew Count : 4 Timer Status :- Manager Query Timer Status : None Manager heartbeat Timer Status : Running Manager JWT Renewel Timer Status : Running ACX JWT Renewel Time : 2023-05-19 18:13:22
History
| Release version | Command history |
|---|---|
| 08.0.92 | This command was introduced. |
| 09.0.10h, 10.0.10b | This command can also be configured in global configuration mode. |