reserved-vlan-map

Assigns a different VLAN ID to the reserved VLAN.
Syntax
reserved-vlan-map vlan vlan-id new-vlan vlan-id
no reserved-vlan-map vlan vlan-id new-vlan vlan-id
Command Default

The reserved VLAN IDs are 4090, 4091 and 4092.

Parameters
vlan vlan-id
Specifies the default reserved VLAN ID.
new-vlan vlan-id
Specifies the new VLAN ID that you want to assign to the reserved VLAN.
Modes

Global configuration mode

Usage Guidelines

For vlan-id, enter a valid VLAN ID that is not already in use. Valid VLAN IDs are numbers from 1 through 4089, 4093, and 4095. VLAN ID 4094 is reserved for use by Single STP.

Note: You must save the configuration (write memory) and reload the software to place the change into effect.

The no form of the command resets the values back to the default reserved VLAN IDs.

Examples

The following example shows how to assign a new VLAN ID to the reserved VLAN IDs. 

device(config)# reserved-vlan-map vlan 4091 new-vlan 10
Reload required. Please write memory and then reload or power cycle.
device(config)# write memory
device(config)# exit
device# reload
History
Release version Command history
08.0.30 This command was introduced.
10.0.20 This command was modified to include 4090 as a reserved VLAN.
Parent topic: Commands O, P, Q, R, and Sa through Sh