ipv6 sg-access-group

Binds an ingress IPv6 access control list (ACL) meant for IPv6 Source Guard (IPSGv6) ports (SG ACL) to a port.
Syntax
ipv6 sg-access-group acl-name in
no ipv6 sg-access-group acl-name
Parameters
acl-name
Specifies the IPv6SG ACL to be bound to the interface.
in
Applies the ACL to inbound traffic.
Modes

Interface configuration mode

Usage Guidelines

The sg-aclv6 command must be configured globally, and the ipv6 source-guard enable command configured for the interface, before an IPSGv6 ACL can be bound to it.

The no form of the command unbinds the ACL from the interface.

Examples

The following example binds IPSGv6 ACL sg-acl1 to port 1/1/2.

device# configure terminal
device(config)# interface ethernet 1/1/2
device(config-if-e1000/1/1/2)# ipv6 source-guard enable
device(config-if-e1000/1/1/2)# ipv6 sg-access-group sg1 in
History
Release version Command history
10.0.20b_cd1 This command was introduced.
Parent topic: Commands I